Search found 190 matches

Go to advanced search

by Alorotom
June 16th, 2017, 10:09 am
Forum: IPFire in General
Topic: Problem with logging ACCEPT, DROP, REJECT. Bug?
Replies: 4
Views: 173

Re: Problem with logging ACCEPT, DROP, REJECT. Bug?

This ist still outstanding.

Any hint?
Where can I find the process logic for the log? Or explain why there is no prefix for the log of some chains?

Alorotom
by Alorotom
June 16th, 2017, 9:52 am
Forum: VPN
Topic: OpenVPN - Zugriff ins Internet bei Forward Blocked nicht möglich
Replies: 11
Views: 233

Re: OpenVPN - Zugriff ins Internet bei Forward Blocked nicht möglich

Hallo Michael, Regel 1 und 2 ergeben keinen Sinn, wenn das Default-Verhalten auf blocked geändert ist. Da vermutlich unterhalb von Regel 8 kein GO mehr für DNS und NTP kommt, würden NTP und DNS (GREEN > RED) letztlich am Default-Verhalten geblockt. So werden jedoch NTP und DNS schon mit Regel 1 und ...
by Alorotom
June 15th, 2017, 9:43 am
Forum: Konfiguration
Topic: Konfiguration für Online-Spiele?
Replies: 4
Views: 109

Re: Konfiguration für Online-Spiele?

Naja, solange Du die Tür nur von innen nach außen pauschal öffnest, ist erst mal noch nichts los. Du hast dann halt die Kommunikation von dem betreffenden PC nicht mehr unter Restriktion. Der darf dann alles nach draußen. Andersrum von draußen nich drinnen ist weiter die Firewall dazwischen, die nic...
by Alorotom
June 12th, 2017, 8:56 am
Forum: Konfiguration
Topic: mitgebrachter WLan-Router am grünen Port
Replies: 6
Views: 211

Re: mitgebrachter WLan-Router am grünen Port

Wie kann man verhindern, daß Geräte mit kopierter und gelogen MAC-Adressen Zugang bekommen? [...] Wie löst Ihr dieses Problem in Firmennetzen? Hallo Martin, üblicherweise, in dem man den physikalischen Zugriff auf die Ressource unterbindet. Also kein Zugriff auf Switche, nicht genutzte Ports deakti...
by Alorotom
June 6th, 2017, 7:34 am
Forum: IPFire in General
Topic: SSH port firewall rules
Replies: 9
Views: 233

Re: SSH port firewall rules

There must be some difference for IPFire to differentiate between one and the other. For example, Server 1, as Source Port you put 64000 and as Destination Port, the 22. In the second, as Source Port you put 64001 and as Destination Port, the 22. Thought, that's what he did. But got it. The old pro...
by Alorotom
June 6th, 2017, 5:21 am
Forum: IPFire in General
Topic: SSH port firewall rules
Replies: 9
Views: 233

Re: SSH port firewall rules

Little OT When from outside make a request from anywhere to port 222, it is fulfilled and not skip to the next. Therefore, the 18 will never be executed. Hello Roberto, really? One request is to port 64000 and the other to port 64001. So IPFire should be able to decide between these two rules. Why s...
by Alorotom
June 4th, 2017, 1:39 pm
Forum: IPFire in General
Topic: DHCP: Start address
Replies: 8
Views: 213

Re: DHCP: Start address

Did you stop the DHCP service before trying to change and save the value?
by Alorotom
June 4th, 2017, 8:34 am
Forum: IPFire in General
Topic: DHCP: Start address
Replies: 8
Views: 213

Re: DHCP: Start address

... Thank you for your reply. I reread this , this and this and agree to your point not using .1 if this is the IP-Adress of IPFire itself. Also if there are printers, NAS, Video-Cams, Switches, aso, I'm with you to leave them in a range outside the DHCP range and configure them with static IP Adre...
by Alorotom
June 4th, 2017, 12:10 am
Forum: IPFire in General
Topic: DHCP: Start address
Replies: 8
Views: 213

Re: DHCP: Start address

Deepcuts wrote:PS: don't start from 1 :)

Ahm, why not?

I understand that it's easier in the configuration not to overlap with the IP of the IPFire itself, but is there any other reason?

Regards
Alorotom
by Alorotom
June 3rd, 2017, 7:56 am
Forum: IPFire in General
Topic: DHCP: Start address
Replies: 8
Views: 213

Re: DHCP: Start address

Hello domsheldon1, feel free to define the range as needed. In any case you should exclude .0 and .255 since .0 is the net and .255 is broadcast. Given your IPFire is .1 you could still define the range to 192.168.20.1 to 192.168.20.254 But you should add a fixed mapping for .1 in the DHCP configura...
by Alorotom
June 2nd, 2017, 5:39 am
Forum: Konfiguration
Topic: Clients untereinander die Kommunikation verbieten
Replies: 1
Views: 115

Re: Clients untereinander die Kommunikation verbieten

Zu Deiner Hauptfrage: Ich sag mal "nein", weil die Kommunikation der Geräte in BLAU untereinander (im selben Subnetz) nicht über die IPFire läuft sondern eben untereinander. Da kommt eine Regel auf der IPFire nicht hin.
by Alorotom
May 28th, 2017, 10:08 am
Forum: Development
Topic: Feature request - Decentralized family communications
Replies: 5
Views: 395

Re: Feature request - Decentralized family communications

cincinnatiman wrote:Point is that ipfire has no control over IPv6

Point is that ipfire has no IPv6 support and IPv6 packets can not pass ipfire.
by Alorotom
May 28th, 2017, 10:04 am
Forum: IPFire in General
Topic: No Webgui Access on main desktop
Replies: 5
Views: 210

Re: No Webgui Access on main desktop

Compare the URL from the devices where it works with that one where you can not access the Webgui. Are they the same?

Or, "reinstall IPFIRE", maybe different password and your browser has cached the old values? Clear Browser Cache and delete saved password for IPFIRE. Any access then?
by Alorotom
May 28th, 2017, 9:56 am
Forum: IPFire in General
Topic: Problem with logging ACCEPT, DROP, REJECT. Bug?
Replies: 4
Views: 173

Re: Problem with logging ACCEPT, DROP, REJECT. Bug?

@FischerM and @Edwin : Thank you for reply. There is a post from @Arne.F, that indicates the same. Seeing this in the log, I'd be happy. But it does not show. The default behaviour for the FORWARDFW is blocked. Therefor I have to create a rule for every wanted traffic from green to red. Some devices...
by Alorotom
May 27th, 2017, 4:06 pm
Forum: IPFire in General
Topic: Problem with logging ACCEPT, DROP, REJECT. Bug?
Replies: 4
Views: 173

Problem with logging ACCEPT, DROP, REJECT. Bug?

Hello, to me it looks like there is no difference in logging ACCEPT, DROP or REJECT in FORWARDFW. Please have a look at the attached Screenshot. There is no way to discover how these packets have been processed. Nor wich rule applied. Is this problem occuring only on my IPFire or can someone confirm...

Go to advanced search