Search found 6812 matches

by Arne.F
Today, 8:59 am
Forum: Hardware
Topic: PC Engines APU2C4 and Gigabit Internet Link
Replies: 5
Views: 107

Re: PC Engines APU2C4 and Gigabit Internet Link

The services looks ok. Normal this should get 930mBit/s in downstream... I already tried also to lower the mtu (step by step down to 1300) and after your reply to 1472. Unfortunately i have no change in Throughput. Only on RED or also on the green client. (The important thing are the green clients b...
by Arne.F
Today, 8:40 am
Forum: Installation
Topic: ipfire with two wireless card
Replies: 1
Views: 42

Re: ipfire with two wireless card

IPFire is not able to install without a normal LAN interface because you have to be online for installing needed addons the AP Mode. To configure the client you need access to the webif. You can only temporary use a cable interface for RED to install the needed addons (hostapd and elinks) and switch...
by Arne.F
Yesterday, 10:30 pm
Forum: IPFire in General
Topic: ipfire 3
Replies: 3
Views: 109

Re: ipfire 3

Its a raw hdd image that can converted to vm systems or written to a real disk to use on hardware.
by Arne.F
Yesterday, 2:20 pm
Forum: IPFire in General
Topic: ipfire 3
Replies: 3
Views: 109

Re: ipfire 3

There is no up-to date release yet.

Stevee install it via pakfire3 from time to time to a development vm/hdd image
http://people.ipfire.org/~stevee/IPFire_3.x/VM-Images/
by Arne.F
Yesterday, 11:13 am
Forum: Hardware
Topic: PC Engines APU2C4 and Gigabit Internet Link
Replies: 5
Views: 107

Re: PC Engines APU2C4 and Gigabit Internet Link

At a local network i have got 921Mbit/s and 520Mbit at a dual way transfer test with a APU2. http://wiki.ipfire.org/en/hardware/pcengines/apu2b4 (QoS, Proxy and ID's disabled, no other addons.) I also tried to set MTU on WAN Interface to 9000. Unfortunately it had no impact to the speed. Try to lowe...
by Arne.F
Yesterday, 6:49 am
Forum: Problemlösungen
Topic: komplilieren der quellen
Replies: 2
Views: 74

Re: komplilieren der quellen

Das er bei einigen Packeten nur einen Kern nimmt ist beabsichtigt. Zumindest der 4.9er gcc baute dann nicht fehlerfrei ... http://git.ipfire.org/?p=ipfire-2.x.git;a=commit;h=6323c4d0e2a0ddf5d78830c325ffc28d39a8013e Auch für boost und cmake ist der parallel build absichtlich deaktviert, für -j4 würde...
by Arne.F
August 21st, 2017, 11:56 am
Forum: IPFire in General
Topic: IPFire/OpenVPN Updates Question
Replies: 8
Views: 243

Re: IPFire/OpenVPN Updates Question

There is no way to update single patches of the core system with pakfire-2. Normal such updates should relaesed monthly. And if we are informed about serious problems it may released off cycle. On the mailinglist we got no hints that this update was critical so we have not seen any reason to prioriz...
by Arne.F
August 21st, 2017, 8:49 am
Forum: Problemlösungen
Topic: Firewalloptionen - WANN kompletter Neustart?
Replies: 10
Views: 171

Re: Firewalloptionen - WANN kompletter Neustart?

Auf der Firewall Optionen Seite gibt es den Bereich für die ALG Kernel Module. Einige von denen lassen sich nicht mehr sauber abschalten wenn man die einmal aktiviert hat, daher braucht man dann einen kompletten Reboot der Maschine. (Deshalb auch die Schwammige Formulierung das einige Optionen einen...
by Arne.F
August 21st, 2017, 8:37 am
Forum: Entwicklung
Topic: Who Is Online! für den IPFire
Replies: 83
Views: 6878

Re: Who Is Online! für den IPFire

Hallo Stephan,

ich hab WIO aus dem Testing tree auf einem Arm (bananapi) System Installiert. Das läuft soweit Super, bis auf die Drop Down Boxen für das "ping" Timeout und die VPN Scanzeiten, die immer wieder auf "1" gesetzt werden wenn man die Configseite aufruft.

Arne
by Arne.F
August 21st, 2017, 7:39 am
Forum: Installation
Topic: "Unable to Install the system" Core 112
Replies: 14
Views: 301

Re: "Unable to Install the system" Core 112

Check you bios settings and force to use LBA if this option is present. Some older bios versions report an empty hdd in large mode which is not really work with parted.
by Arne.F
August 21st, 2017, 7:31 am
Forum: IPFire in General
Topic: IPFire/OpenVPN Updates Question
Replies: 8
Views: 243

Re: IPFire/OpenVPN Updates Question

Yes and No.

Fresh core112 installations have the new version, updated not because we have missed to put some files to the updater. This will included in the core113 update. (you can already install this from testing tree)
by Arne.F
August 20th, 2017, 9:59 pm
Forum: Development
Topic: ipfire core 112 not really changing DNS Servers on RED when instructed to do so
Replies: 2
Views: 51

Re: ipfire core 112 not really changing DNS Servers on RED when instructed to do so

Network external shows the status of the red connection which is get from config (static), dhcp or ppp. This may not display the servers that are currently used for unbound. Unbound may also reject incompatible upstream servers at start and fall to recursor mode and ask the iana rootservers direct. ...
by Arne.F
August 20th, 2017, 7:17 am
Forum: Development
Topic: CORE 112 SQUID
Replies: 7
Views: 180

Re: CORE 112 SQUID

Also the core112 updater has not updated squid because we had forgotten to ship. Only fresh installs has the New squid promised in the release notes.

This will moved to core113...
by Arne.F
August 17th, 2017, 1:15 pm
Forum: VPN
Topic: [gelöst] PPTP Port Forwarding
Replies: 7
Views: 117

Re: PPTP Port Forwarding

Die Regel ist so nicht benutzbar. Quelleport Rot:1723 Zielport Grün:1723 weiterleiten auf ...
Das Ziel müsste die Rote IP der Firewall sein. Momentan hast du ein Portforwarding das von ROT kommen muss aber nur aus dem Grünen Netz erreichbar ist und von dort auf ein System in Grün weiterleitet.