Search found 18 matches

by cocolocko
December 22nd, 2019, 10:15 am
Forum: Konfiguration
Topic: Grün nach Orange
Replies: 8
Views: 5225

Re: Grün nach Orange

Hallo zusammen, ich habe in der Orangenen DMZ einen Webserver stehen, der von aussen über Port 80 und 443 mit Domain Namen (DynDNS) erreichbar ist. Nun habe ich das Problem, das ich von meinen Grünen LAN über den Domain Namen dort nicht zugreifen kann. Ich bekomme die Regel nicht konfiguriert. Kann ...
by cocolocko
October 18th, 2018, 9:53 am
Forum: Addons
Topic: [SOLVED]mii-tool -> Unable to detect Gigabit -> use ethtool instead
Replies: 6
Views: 3560

Re: [SOLVED]mii-tool -> Unable to detect Gigabit -> use ethtool instead

Hi Michael, is the following entry for the /etc/sysconfig/rc.local right, to make it persistent ? ETHTOOL_OPTS="speed 100 duplex full autoneg off" (This should be Speed 100Mb/s and Full Duplex with Auto-negotiation off ) Thanks a lot Greetings You can use /etc/sysconfig/rc.local instead, but I guess...
by cocolocko
September 14th, 2018, 9:54 am
Forum: IPFire in General
Topic: Entropy
Replies: 1
Views: 918

Entropy

Hi together, today i took a look at my IPFire system (IPFire 2.21 (i586) - Core Update 123 ), it is running on a Intel i5-3450S CPU, which support RDRAND. But i see in the Webui under 'Entropy' that the 'Random Number Generator Daemon' has Status 'STOPPED'. In the past it was running. Does someone h...
by cocolocko
October 6th, 2017, 9:30 pm
Forum: VPN
Topic: IPsec Verbindung nach Update down
Replies: 2
Views: 872

Re: IPsec Verbindung nach Update down

OK, erledigt, hatte ein Problem mit der 'Grouptype' Einstellung: 22:48:59 charon: 12[CFG] skipped invalid proposal string: aes256gcm128-sha2_512-modpcurve25519 22:48:59 charon: 12[CFG] algorithm 'modpcurve25519' not recognized 22:48:59 charon: 12[CFG] received stroke: add connection '***********' 'c...
by cocolocko
October 6th, 2017, 9:18 pm
Forum: VPN
Topic: IPsec Verbindung nach Update down
Replies: 2
Views: 872

IPsec Verbindung nach Update down

Hallo zusammen,

ich habe 3 ipfire per ipsec verbunden.
Nach dem update von IPFire 2.19 core update 113 nach 114 verbinden sich die Tunnel nicht mehr. :o
Hat jemand einen Tipp, wie ich diese wieder zum laufen bekomme? ???

Vielen Dank

Grüße
by cocolocko
January 27th, 2016, 8:34 pm
Forum: Development
Topic: Hardware RNG -> rtl-entropy
Replies: 14
Views: 2053

Re: Hardware RNG -> rtl-entropy

ok, now it looks like that it is working, but i don't know. CPU has a load of 50 (Atom CPU) and cli tell this: # rtl_entropy No configuration file found, continuing with defaults. Options parsed, continuing. Found 1 device(s): 0: Terratec Cinergy T Stick RC (Rev.3) Using device 0: Terratec Cinergy T...
by cocolocko
January 26th, 2016, 2:21 pm
Forum: Development
Topic: Hardware RNG -> rtl-entropy
Replies: 14
Views: 2053

Re: Hardware RNG -> rtl-entropy

Hi ummeegge, how do i force to install on cli the packages that you compile, because pakfire is telling me pakfire install rtl-entropy-master-1.ipfire PAKFIRE WARN: The pak "rtl-entropy-master-1.ipfire" is not known. Please try running "pakfire update". PAKFIRE ERROR: No packages to install. Exiting...
by cocolocko
January 23rd, 2016, 11:26 am
Forum: Development
Topic: Hardware RNG -> rtl-entropy
Replies: 14
Views: 2053

Re: Hardware RNG -> rtl-entropy

Yeaahhh, Jippi, freu !! ;D

thanks a LOT!
On monday a will test it with my dvb-t stick!

Greetings
by cocolocko
January 22nd, 2016, 12:20 pm
Forum: Development
Topic: Hardware RNG -> rtl-entropy
Replies: 14
Views: 2053

Re: Hardware RNG -> rtl-entropy

ummeegge: i installed 'git' on my ipfire system and then i cloned 'rtl-entropy' in the cli !!! so 'cmake' is not in my ipfire system on the cli! Greetings Your welcome, whaT? i need to build ipfire from sources? no way! :'( :-[ ??? why you´d than installed git and cloned the IPFire sources into your...
by cocolocko
January 15th, 2016, 1:45 pm
Forum: Development
Topic: Hardware RNG -> rtl-entropy
Replies: 14
Views: 2053

Re: Hardware RNG -> rtl-entropy

whaT? i need to build ipfire from sources? no way! :'( :-[ ???
Is it not possible, that someone build this 'rtl-entropy' and it will be available with pakfire?
It would be such a big thing to have this feature!
Thanks

Greetings
by cocolocko
January 14th, 2016, 8:14 pm
Forum: Development
Topic: Hardware RNG -> rtl-entropy
Replies: 14
Views: 2053

Re: Hardware RNG -> rtl-entropy

today i tried to build rtl-entropy, but until now, no success. In IPFire, i installed 'git' and i cloned the git-repo in the cli to my ipfire, like discribed here https://github.com/pwarren/rtl-entropy/#installation when i try to do 'cmake ../' --> cmake not found, and i can not install cmake over p...
by cocolocko
January 13th, 2016, 12:43 pm
Forum: Development
Topic: Hardware RNG -> rtl-entropy
Replies: 14
Views: 2053

Hardware RNG -> rtl-entropy

Hi @ all,

does someone have experience with an RTL SDR Stick for RNG?
Would this work with ipfire?

source @ https://github.com/pwarren/rtl-entropy

Greetings
by cocolocko
April 3rd, 2014, 10:29 am
Forum: VPN
Topic: OpenVPN mit IPFire Server und DD-WRT Client
Replies: 7
Views: 1733

OpenVPN mit IPFire Server und DD-WRT Client

Hallo zusammen, ich versuche verzweifelt eine Verbindung vom LAN meines DD-WRT Router(Linksys E3200) über OpenVPN zur IPFire(IPFire v2.13 c75) ins Grüne LAN herzustellen, leider ohne Erfolg. Die OpenVPN Verbidung kommt mit dem DD-WRT zustande, lediglich vom LAN der DD-WRT einen Ping zu einem Rechner...
by cocolocko
January 29th, 2014, 1:04 pm
Forum: Konfiguration
Topic: Passwort "root"
Replies: 5
Views: 2286

Re: Passwort "root"

Hallo Community, IPFire Entwickler & Dokumentierer des WIKI hier meine Erfahrung das ROOT Passwort wieder zurückzusetzen. Ich habe das System neu Aufgesetzt, mit neuem Root-Passwort, und die Datensicherung '*.ipf' Datei zurückgespielt. Leider, so scheint es, wird dann das Root Passwort auch wied...
by cocolocko
January 27th, 2014, 7:55 pm
Forum: Konfiguration
Topic: Passwort "root"
Replies: 5
Views: 2286

Re: Passwort "root"

mir geht es hier genauso mit einer IPfire, ich habe das Root passwort nicht mehr, komme aber ins Webinterface. Heist also, ich mache ein Backup in der Datensicherung, lade die lokal auf den PC, setze eine neue IPFire auf und spiele die Datensicherungsdatei '*.ipf' wieder ein, und alles ist wieder be...