Search found 11 matches

by Daniel L.
January 22nd, 2016, 11:04 am
Forum: IPFire in General
Topic: Compex WLE600VX Wlan (ath10k - Atheros QCA9882) not detected for Blue Interface
Replies: 37
Views: 15503

Re: Compex WLE600VX Wlan (ath10k - Atheros QCA9882) not detected for Blue Interface

driver=nl80211 interface=<your_wlan_device> bssid=<mac_of_your_wlan_device> logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=0 ctrl_interface=/var/run/hostapd ctrl_interface_group=0 ssid=<your_network_name> country_code=<your_country_code> ieee80211d=1 ieee80211h=1 hw_mod...
by Daniel L.
January 22nd, 2016, 10:44 am
Forum: IPFire in General
Topic: ath10k implementation
Replies: 20
Views: 5337

Re: ath10k implementation

Oh sorry my bad that should suffice to set some other regdom. Can you issue these commands? iw dev <your_wlan_dev> scan iw dev <your_wlan_dev> station dump Anyways DFS didn't work for me unless I added some other patches, afaik. Also I couldn't use others channels except for 36 in the 5GHz band.
by Daniel L.
January 22nd, 2016, 10:18 am
Forum: Hardware
Topic: Wlan Karte oder Fritzbox
Replies: 12
Views: 2417

Re: Wlan Karte oder Fritzbox

Was auch geht (das habe ich im Moment auch mit dem APU Board): o2 VDSL an Speedport 300HS Speedport 300HS an ipfire red0 für pppoe ipfire red0:1 im internen Netz des Modems, um die Daten auszulesen wie Sync etc. zwei WLAN Karten Compex WLE200NX und Compex WLE900VX Compex WLE200NX macht zwei Netze au...
by Daniel L.
January 22nd, 2016, 9:48 am
Forum: IPFire in General
Topic: ath10k implementation
Replies: 20
Views: 5337

Re: ath10k implementation

The restrictions are driven by the common module ath.ko, the database regulatory.bin and the tool crda and not the firmware. You will need to patch the ath.ko to change the default regdom for cards which have it set to 0x0 in their eeprom (that's exactly what is wanted by atheros and done by distrib...
by Daniel L.
January 15th, 2016, 10:17 am
Forum: Installation
Topic: APU1d4 or APU 2d4 ?. What would be the best ?.
Replies: 11
Views: 6138

Re: APU1d4 or APU 2d4 ?. What would be the best ?.

Devices of this size usually don't do a lot of encryption/decryption. So AES-NI is nice to have, but I do not think that this would decrease the CPU load in a way that can be measured for the most users. Size doesn't matter, more what you do with it. If you use it for VPN then you will have lots of...
by Daniel L.
January 15th, 2016, 9:26 am
Forum: Installation
Topic: WLAN AP einrichten
Replies: 20
Views: 4097

Re: WLAN AP einrichten

Hi Navidar,

wenn du das gescheit an's Laufen kriegen willst, wirst du dir zumindest den kernel selber bauen müssen.
by Daniel L.
January 15th, 2016, 9:24 am
Forum: IPFire in General
Topic: Compex WLE600VX Wlan (ath10k - Atheros QCA9882) not detected for Blue Interface
Replies: 37
Views: 15503

Re: Compex WLE600VX Wlan (ath10k - Atheros QCA9882) not detected for Blue Interface

You can get it working but it needs manual intervention (see viewtopic.php?f=27&t=15300&p=92586&hilit=ath10k#p93831). I've a Compex WLE900VX and WLE200NX both working fine.

For ac you need to set the VHT caps. I can paste my hostapd.conf later, when I'm back home.
by Daniel L.
January 15th, 2016, 9:16 am
Forum: IPFire in General
Topic: ath10k implementation
Replies: 20
Views: 5337

Re: ath10k implementation

Besides that you can't get ath9k and ath10k cards working properly (like you may be used to in other consumer hardware like fritzbox e.g. DFS, auto channel etc.) with the stock ipfire distribution. This is because e.g. CONFIG_CFG80211_CERTIFICATION_ONUS is not set for the kernel, some viable patches...
by Daniel L.
December 14th, 2015, 9:19 am
Forum: Wireless Lan
Topic: HT Caps für WLE900VX
Replies: 10
Views: 5275

Re: HT Caps für WLE900VX

Hi cmah, welchen Kanal nutzt du? Was sagt ein: dmesg | grep ath Wird dort auch 0x0 bzw. US als default country gefunden und gesetzt? channel=36 ieee80211n=1 ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40][SMPS-STATIC] ieee80211ac=1 vht_oper_chwidth=1 vht_oper_centr_f...
by Daniel L.
December 14th, 2015, 9:13 am
Forum: Development
Topic: Core Update 95, Suggestion for a sticky thread
Replies: 17
Views: 4451

Re: Core Update 95, Suggestion for a sticky thread

Hi there, first of all thank you guys for the good work and keep it up. As far as I can see, already some wireless patches from openwrt are included, could these two be included as well: https://dev.openwrt.org/browser/trunk/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch?rev=46948 htt...