Search found 14 matches

by Spagetthi
March 3rd, 2011, 7:26 am
Forum: IPFire in General
Topic: Issue with clamavsquid and squid and perhaps my misconfigration?
Replies: 3
Views: 1464

Re: Issue with clamavsquid and squid and perhaps my misconfigration?

Thank you for the reply. What you say makes sense but 1Gig of memory is allot. Why is the default install swap space only 265064 KB? This is very little. I usually partition my Linux swap to be at least twice the size of the amount of ram I have installed. In this case I would have made it 2Gig. &nb...
by Spagetthi
March 2nd, 2011, 3:10 pm
Forum: IPFire in General
Topic: Issue with clamavsquid and squid and perhaps my misconfigration?
Replies: 3
Views: 1464

Issue with clamavsquid and squid and perhaps my misconfigration?

Hello, First of all my advproxy config: This one works always. http://Screenshot.png   see screenshot if this doesn' show. My network has just under 30 computers that use this firewall. I also use filter for website certain time restrictions. And do make use of accelerator. They all work fine.&...
by Spagetthi
February 25th, 2011, 8:54 am
Forum: IPFire in General
Topic: Error while updating pakfire !
Replies: 7
Views: 4019

Re: Error while updating pakfire !

After trying to change back to the original gpg and still not working. I solved my original problem. I read somewhere else on the forum that it may be that port 11371 is blocked. Since I do have ipfire in mode 1 for outgoing connections and there was no rule for port 11371. So i added the rule for r...
by Spagetthi
February 22nd, 2011, 8:10 am
Forum: IPFire in General
Topic: Error while updating pakfire !
Replies: 7
Views: 4019

Re: Error while updating pakfire !

Greetings! I reloaded an ipfire box because the hard-drive was faulty. I installed from usb flash disk the 2.9 ipfire image i downloaded yesterday. Now I have the same problem, I also tried the advice Arne.f suggested but the result is the same error with pakfire. I stripped some of the uid info and...
by Spagetthi
September 27th, 2010, 10:52 am
Forum: IPFire in General
Topic: Snort Question.
Replies: 3
Views: 1604

Re: Snort Question.

where do i get them?, cause i have googled and  searched all over with no success.
by Spagetthi
September 27th, 2010, 7:46 am
Forum: IPFire in General
Topic: Snort Question.
Replies: 3
Views: 1604

Snort Question.

Hello, First of all I want to say thank you for a good stable IPfire. I find sort useful , last week i found a virus on my network thanks to snort. But most of the time my snort logs are too verbose. I see this all the time. ET POLICY Inbound HTTP CONNECT Attempt on Off-Port Priority: 3 Type: Misc a...
by Spagetthi
July 27th, 2010, 3:40 pm
Forum: Addons
Topic: Hi Please help with my mail server config. I think im almost there.
Replies: 6
Views: 5868

Re: Hi Please help with my mail server config. I think im almost there.

Greetings Friends, Thanks for the help with this... I really appreciate it. Ok, i got rid of my original fetchmail talking to postfix problem. by adding to these two lines 127.0.0.1 like this mynetworks = 127.0.0.0/8, 192.168.111.0/24 , 127.0.0.1 inet_interfaces = 192.168.111.1, 127.0.0.1 So Yay! it...
by Spagetthi
July 23rd, 2010, 3:21 pm
Forum: Addons
Topic: Hi Please help with my mail server config. I think im almost there.
Replies: 6
Views: 5868

Re: Hi Please help with my mail server config. I think im almost there.

To answer my own question about Why is my smtp listening on macname.domname and not loaclhost or * ? If i change to inet_interfaces = all then i get netstat -tap tcp        0      0 *:smtp                  *:*  &nbs...
by Spagetthi
July 23rd, 2010, 3:02 pm
Forum: Addons
Topic: Hi Please help with my mail server config. I think im almost there.
Replies: 6
Views: 5868

Re: Hi Please help with my mail server config. I think im almost there.

Im pretty sure postfix is running. Two reasons for this. The first being I can send emails to outside of mynetwork to my gmail address via the firewall smtp server. The second reason is when i do this: postfix status postfix/postfix-script: the Postfix mail system is running: PID: 26477 And I can al...
by Spagetthi
July 23rd, 2010, 12:26 pm
Forum: Addons
Topic: Hi Please help with my mail server config. I think im almost there.
Replies: 6
Views: 5868

Hi Please help with my mail server config. I think im almost there.

My current setup is like this. I want to use ipfire to send emails to my isp mail server and also fetch emails from there. Via pop and smtp im not worried about secure pop and smtp right now. Currently I have it working so that I can send emails out. that part is working. Also when i send local emai...
by Spagetthi
July 13th, 2010, 7:40 am
Forum: Addons
Topic: Mail Server - Cyrus-IMAPd, Postfix and Openmailadmin ? How?
Replies: 3
Views: 3457

Re: Mail Server - Cyrus-IMAPd, Postfix and Openmailadmin ? How?

Hi Karel,

Kyk na die.

http://translate.google.com/translate?j ... l=de&tl=en

Although this didn't help me much, since im not using mx records etc. But i have managed to get a smtp server working by editing /etc/postfix/main.cf . Although i still need to sort out authentication. Hope that helps a bit.
by Spagetthi
June 30th, 2010, 3:44 pm
Forum: IPFire in General
Topic: ipfire question
Replies: 6
Views: 2443

Re: ipfire question

Sjoe! I am really impressed with ipfire guys... I installed it thinking if this thing doesn't detect my sony erricson there is no way im going to have enough time to figure out how to install a driver for it.  Anyway I installed ipfire on the box i was testing endian (efw) on.  Im was so s...
by Spagetthi
June 30th, 2010, 9:03 am
Forum: IPFire in General
Topic: ipfire question
Replies: 6
Views: 2443

Re: ipfire question

Thank you for your reply Maniacikarus Please forgive my ignorance I have taken a look at the development section in the wiki and I see there is sources thing available. but recompiling the entire ipfire kernel for one a driver is overkill on time and resources in my case. Is there any chance that th...
by Spagetthi
June 29th, 2010, 3:07 pm
Forum: IPFire in General
Topic: ipfire question
Replies: 6
Views: 2443

ipfire question

Hallo, I have never used Ipfire before but would like to try it however before I do try ipfire, can someone answer two of my questions please. In case ipfire does not support my sony erricson k550 (cdc_wdm.ko). Are there kernel devels,gcc ,make etc easily available for the latest stable release of i...