Search found 25 matches

by cwensink
September 30th, 2019, 4:17 pm
Forum: IPFire in General
Topic: Can't find documentation on IPSec Dead Peer Detection
Replies: 3
Views: 617

Re: Can't find documentation on IPSec Dead Peer Detection

I also have questions on this
by cwensink
September 30th, 2019, 4:07 pm
Forum: IPFire in General
Topic: continued troubles with backups
Replies: 1
Views: 1340

continued troubles with backups

Everyone, I've been struggling with getting consistent backups to our remote site to complete over the weekends. Here's the basic structure of backups: Local: Linux servers -> rsync -> Daisy(Linux) Windows servers ->Windows server Backup software via samba share-> Daisy (Linux) Remote: Daisy -> rsyn...
by cwensink
August 9th, 2019, 4:39 pm
Forum: IPFire in General
Topic: 133 to 134 vpn down
Replies: 9
Views: 865

Re: 133 to 134 vpn down

Thanks JonM, Here's the links that I've found that do not work. I do not need any particular one at this time: On this page: https://wiki.ipfire.org/fireinfo red link first one on the page: https://fireinfo.ipfire.org/stats On the Credits page: Licence Link: https://wiki.ipfire.org/configuration/sys...
by cwensink
August 7th, 2019, 6:52 pm
Forum: IPFire in General
Topic: 133 to 134 vpn down
Replies: 9
Views: 865

Re: 133 to 134 vpn down

Arne F, I know it doesn't make sense, I just posted the steps of exactly what I did because there may be someone out there going through the same thing as I did, and is wondering why it did not work. I have no explanation of why it worked doing things in that order, it's a mystery. Also the lack of ...
by cwensink
August 6th, 2019, 4:25 pm
Forum: IPFire in General
Topic: 133 to 134 vpn down
Replies: 9
Views: 865

Re: 133 to 134 vpn down

Thanks for the information. I figured it out. You are correct, the messages that I posted were for openvpn not ipsec, I was just trying to post log output that might be helpful. I don't know why it worked, or how it worked, but after upgrading both sides to 134, I had to go into pakfire, then remove...
by cwensink
August 6th, 2019, 1:27 pm
Forum: IPFire in General
Topic: DNS over VPN
Replies: 4
Views: 505

Re: DNS over VPN

Both servers are in the hosts entry in the gui, they were there before too
by cwensink
August 6th, 2019, 1:21 pm
Forum: IPFire in General
Topic: 133 to 134 vpn down
Replies: 9
Views: 865

Re: 133 to 134 vpn down

I rebooted overnight and now both sides are running 134, the VPN tunnel still says that it's connected but I have no communication with the remote site. I can ping the remote IP, but not the internal network of any host, I cannot telnet to the internal ip of the remote network over port 444, I get c...
by cwensink
August 5th, 2019, 8:38 pm
Forum: IPFire in General
Topic: 133 to 134 vpn down
Replies: 9
Views: 865

133 to 134 vpn down

At our main site I have ipfire 133 running, and pending a reboot to update to 134. At a remote site ipfire 134 is running. I have an IPSec VPN tunnel between locations. The tunnel says it's connected and is green in the ipsec area, but I cannot reach the remote host by any service or pinging. Reboot...
by cwensink
August 5th, 2019, 8:33 pm
Forum: IPFire in General
Topic: DNS brief outage
Replies: 1
Views: 241

DNS brief outage

Since upgrading to 133 whenever I make a change to /etc/hosts there seems to be a brief outage of DNS services, of about 30 seconds. Our ipfire box is a custom built Xeon Quad Core CPU, 8 GB ram, and a 500 sata disk so I doubt there's a bottleneck in the hardware, but it's enough of an outage that w...
by cwensink
August 5th, 2019, 8:29 pm
Forum: IPFire in General
Topic: DNS over VPN
Replies: 4
Views: 505

DNS over VPN

In the process of migrating some server 2008 to server 2012 services, I've run into a DNS issue. We have an older server called atam and a new one named atam12. Both servers can be pinged and by name and ip internally. I can get to the web interface on both servers, in the green network without issu...
by cwensink
August 1st, 2019, 8:02 pm
Forum: IPFire in General
Topic: many broken links on ipfire website
Replies: 3
Views: 507

many broken links on ipfire website

Has anyone else noticed in the last week or two the flood of broken links on the ipfire website? Has the site been compromised? Was this related to the server migrations or the fraudulent ipfire website reported by Michael Tremer from Lightning wire labs in the post from July 13? Example: https://ww...
by cwensink
June 6th, 2019, 1:52 pm
Forum: IPFire in General
Topic: yum update times out after upgrade to 131
Replies: 21
Views: 2562

Re: yum update times out after upgrade to 131

You are correct sir, IPS is turned on. When I turned off IPS then yum updates with the proxy on works as normal. I then turned IPS back on, ran yum update again then it was back to timing out, so this is definitely the section of software I then unchecked the emerging-policy.rules, hit apply, and th...
by cwensink
June 5th, 2019, 6:21 pm
Forum: IPFire in General
Topic: yum update times out after upgrade to 131
Replies: 21
Views: 2562

Re: yum update times out after upgrade to 131

More detail: contents of /var/log/squid/access.log when trying to run yum update from a server inside the LAN: ---------------------------------------------------------------------------------------------------------------------- 1559758076.387 31030 10.5.1.22 TCP_REFRESH_ABORTED/000 0 GET http://mi...
by cwensink
June 5th, 2019, 6:03 pm
Forum: IPFire in General
Topic: yum update times out after upgrade to 131
Replies: 21
Views: 2562

Re: yum update times out after upgrade to 131

I found another detail that might be causing an issue. yum update is still failing with the transparent proxy on: -------------------------------- [root@daisy iqmsmh]# yum update Loaded plugins: fastestmirror Setting up Update Process Loading mirror speeds from cached hostfile Could not retrieve mir...
by cwensink
June 3rd, 2019, 6:52 pm
Forum: IPFire in General
Topic: yum update times out after upgrade to 131
Replies: 21
Views: 2562

Re: yum update times out after upgrade to 131

With the proxy turned off, I can run yum update cleanly and smoothly with no problems: I went through each of these sub areas, as you suggested: With the proxy line commented out in yum.conf: #proxy=http://10.5.1.1:8080 Proxy off, Transparent mode off, GEO Location off , URL Filter off , Update Acce...