Search found 461 matches

by Deepcuts
September 26th, 2018, 4:56 pm
Forum: Installation
Topic: Very slow shutdown and boot
Replies: 9
Views: 3022

Re: Very slow shutdown and boot

I thought of that possibility but was too lazy to check :)
by Deepcuts
September 26th, 2018, 3:07 pm
Forum: Installation
Topic: Very slow shutdown and boot
Replies: 9
Views: 3022

Re: Very slow shutdown and boot

Hellfire wrote:
September 25th, 2018, 5:13 pm
Ok. Here it's the other way round: slow boot times :(
Then name the topic accordingly.
by Deepcuts
September 26th, 2018, 8:13 am
Forum: IPFire in General
Topic: RED interface failing to get IP through DHCP
Replies: 10
Views: 3249

Re: RED interface failing to get IP through DHCP

ifconfig shows 192.168.2.2 while WUI shows 192.168.2.10
Both values are captured at the same time?
Will try to replicate with another router in front of my ipfire
by Deepcuts
September 26th, 2018, 6:57 am
Forum: IPFire in General
Topic: RED interface failing to get IP through DHCP
Replies: 10
Views: 3249

Re: RED interface failing to get IP through DHCP

I asked for ifconfig red0 when in DHCP mode to see if it loses IP, thus the reason it is not working after a router reboot.
Not when it is set static.
A switch should not change anything, unless it is faulty or has management on it and somehow it is setup incorrectly.
by Deepcuts
September 26th, 2018, 3:18 am
Forum: IPFire in General
Topic: RED interface failing to get IP through DHCP
Replies: 10
Views: 3249

Re: RED interface failing to get IP through DHCP

So it has an IP assigned. It should work. Have you noticed you have transmit errors? Some old linux kernels had such problems but given that IPFire now has a pretty recent kernel, I would rule out such possibility and blame the actual network card. Maybe try another card? Just to be sure, are you us...
by Deepcuts
September 25th, 2018, 4:56 pm
Forum: IPFire in General
Topic: RED interface failing to get IP through DHCP
Replies: 10
Views: 3249

Re: RED interface failing to get IP through DHCP

After a router restart, when it is not working, what does a

Code: Select all

ifconfig red0
show on IPFire?
by Deepcuts
September 25th, 2018, 4:13 pm
Forum: Installation
Topic: Very slow shutdown and boot
Replies: 9
Views: 3022

Re: Very slow shutdown and boot

Only for shutdown.
Boot times are decent on my machine.
Would love faster boot times, don't get me wrong :)
by Deepcuts
September 25th, 2018, 4:58 am
Forum: Installation
Topic: Very slow shutdown and boot
Replies: 9
Views: 3022

Re: Very slow shutdown and boot

Try https://forum.ipfire.org/viewtopic.php? ... wn#p114251
Using a value of 3 instead of 1.
I am using it without a problem to this day, but note that Arne said it is not safe.
by Deepcuts
September 24th, 2018, 4:35 am
Forum: IPFire in General
Topic: DDNS no longer working - using dyn.com
Replies: 1
Views: 662

Re: DDNS no longer working - using dyn.com

"Temporary failure in name resolution"
Your DNS is not working or the domain has temporary issues.
by Deepcuts
September 23rd, 2018, 1:53 pm
Forum: IPFire in General
Topic: seeking some advise
Replies: 4
Views: 852

Re: seeking some advise

You should have: 1. Firewall 2. IPFire 192.168.0.x Behind IPFire have the Windows server and the clients, on the same network. Leave DHCP on IPFIre and setup the "next server" DHCP entry with the IP of Windows Server (the one with PXE) This way, you instruct your PXE clients to boot off of Windows S...
by Deepcuts
September 20th, 2018, 9:56 pm
Forum: IPFire in General
Topic: How do I? Block Group of IP Addresses
Replies: 5
Views: 1132

Re: How do I? Block Group of IP Addresses

Guardian had nothing to do with it.
Guardian works in conjunction with Intrusion Detection/Snort and blocks detected threats via iptables.
by Deepcuts
September 19th, 2018, 3:41 pm
Forum: IPFire in General
Topic: Downloading limited to 6 mbps & causing connection issues
Replies: 10
Views: 1827

Re: Downloading limited to 6 mbps & causing connection issues

Have you tried with another ethernet cable between PFSense and IPFire? A bit slow for gigabit, but maybe a limitation of IPFire's CPU. Never used one so I do not know. As for blocklists check out https://forum.ipfire.org/viewtopic.php?f=50&t=17787&p=112777&hilit=blocklist#p112777 This is the first t...
by Deepcuts
September 19th, 2018, 12:32 pm
Forum: IPFire in General
Topic: Downloading limited to 6 mbps & causing connection issues
Replies: 10
Views: 1827

Re: Downloading limited to 6 mbps & causing connection issues

Local seems OK for 100 Mbps. Have you tried connecting IPFire directly to the DSL modem, bypassing PFSense? Also, what is the reason for an extra IPFire router behind PFSense? Just curios. If there is not specific reason for two routers, I would just ditch one of them. (hint: ditch PFSense) Also, ca...
by Deepcuts
September 19th, 2018, 10:39 am
Forum: IPFire in General
Topic: Downloading limited to 6 mbps & causing connection issues
Replies: 10
Views: 1827

Re: Downloading limited to 6 mbps & causing connection issues

To test local network performance, from IPFire go to pakfire and install iperf3. Install iperf 3 on a client behind IPFire. For windows, get this: https://iperf.fr/iperf-download.php#windows SSH to IPFire and run: iperf3 -s From a client behind IPFire run: iperf3.exe -c IPFireInternalIP Where IPFire...