Das Grundgerüst des IPFire - Hardware Allgemein und auch spezielle Hardwarefragen und Probleme
-
mr.nice.
- Posts: 14
- Joined: June 23rd, 2014, 9:49 am
Post
by mr.nice. » May 26th, 2019, 8:14 am
Hallo Leute,
ich bin mittlerweile auf eine kleine PC Engines Box umgestiegen, läuft soweit ganz gut, aber die firmware ist nicht aktuell.
Die Addons firmware-update, flashrom und pcengines-apu-firmware sind installiert, aber wie starte ich jetzt ein Firmware update?
Danke
Liebe Grüße
-
Lux73
- Posts: 34
- Joined: January 31st, 2017, 5:40 pm
Post
by Lux73 » May 26th, 2019, 6:30 pm
-
rossi185
- Posts: 31
- Joined: February 3rd, 2014, 10:25 pm
Post
by rossi185 » July 3rd, 2019, 9:04 pm
Die Antwort hat mir persöhnlich jetzt nicht weitergeholfen.
Wie man das BIOS mittels USB aktualisiert war mir klar.
Aber wie funktioniert es bitte mit dem tollen Pakfire Plugin?
Ich glaube, die Antwort auf Frage hat mr.nice auch gesucht.
Danke, für ernsthafte und klare Antworten.
-
Arne.F
- Core Developer

- Posts: 8522
- Joined: May 7th, 2006, 8:57 am
- Location: BS <-> NDH
-
Contact:
Post
by Arne.F » July 4th, 2019, 5:11 am
Mit serieller Konsole oder ssh als root einloggen und 'firmware-update' starten.
Arne
Support the project on the
donation!
PS: I will not answer support questions via email and ignore IPFire related messages on my non IPFire.org mail addresses.
-
Hellfire
- Posts: 697
- Joined: November 8th, 2015, 8:54 am
Post
by Hellfire » July 4th, 2019, 8:08 am
Arne.F wrote: ↑July 4th, 2019, 5:11 am
Mit serieller Konsole oder ssh als root einloggen und 'firmware-update' starten.
Geht ein Firmware-Update tatsächlich auch direkt im IPFire selbst? Ich habe nur die Möglichkeit über einen Boot-Stick gekannt.
Es gab oder gibt doch ein Problem mit der seriellen Konsole beim Booten. Da musste man doch eine Einstellung im BIOS umschalten, damit man die Ausgabe der Console wieder korrekt angezeigt bekam, oder?
Ansonsten ist dann wohl Coreboot in der Version 4.9.0.6 interessant:
https://pcengines.github.io/
Wird denn mittlerweile TRNG vom Linux Kernel unterstützt:
viewtopic.php?t=16032#p118000?
Michael
-
DJ-Melo
- Posts: 678
- Joined: July 8th, 2014, 7:12 am
Post
by DJ-Melo » July 4th, 2019, 9:08 am
Arne.F wrote: ↑July 4th, 2019, 5:11 am
Mit serieller Konsole oder ssh als root einloggen und 'firmware-update' starten.
wenn ich das tue kommt "no command given"
die genannten addons sind alle installiert. wie funktioniert's denn?
-
Arne.F
- Core Developer

- Posts: 8522
- Joined: May 7th, 2006, 8:57 am
- Location: BS <-> NDH
-
Contact:
Post
by Arne.F » July 4th, 2019, 2:28 pm
Ups. Da fehlt ein Hilfe Text. Normal sollte dort eine Erklärung kommen welche Parameter das script kennt. Mach mal nen Bug auf.
Versuch mal
dann sollte er den Board typ usw. anzeigen und mit
dann flashen.
Geht ein Firmware-Update tatsächlich auch direkt im IPFire selbst? Ich habe nur die Möglichkeit über einen Boot-Stick gekannt.
Ja.
Es gab oder gibt doch ein Problem mit der seriellen Konsole beim Booten. Da musste man doch eine Einstellung im BIOS umschalten, damit man die Ausgabe der Console wieder korrekt angezeigt bekam, oder?
Nur fürs das Syslinux vor dem Installer. In grub und kernel ging das immer. Inzwischen empfehlen wir die Doppelten Zeichen in Syslinux zu ignorieren (man findet den Menupunkt trotzdem)
Wir liefern noch 4.9.0.3 aber das werd ich demnächst updaten...
Wird denn mittlerweile TRNG vom Linux Kernel unterstützt: viewtopic.php?t=16032#p118000?
Nö.
Arne
Support the project on the
donation!
PS: I will not answer support questions via email and ignore IPFire related messages on my non IPFire.org mail addresses.
-
DJ-Melo
- Posts: 678
- Joined: July 8th, 2014, 7:12 am
Post
by DJ-Melo » July 4th, 2019, 3:26 pm
Arne.F wrote: ↑July 4th, 2019, 2:28 pm
Ups. Da fehlt ein Hilfe Text. Normal sollte dort eine Erklärung kommen welche Parameter das script kennt. Mach mal nen Bug auf.
Versuch mal
dann sollte er den Board typ usw. anzeigen und mit
dann flashen.
das funktioniert danke
-
Hellfire
- Posts: 697
- Joined: November 8th, 2015, 8:54 am
Post
by Hellfire » July 4th, 2019, 6:40 pm
Die erforderlichen Pakete scheinen wohl in Core 130 noch nicht mit dabei zu sein, leige ich da richtig mit meiner Vermutung?
-
DJ-Melo
- Posts: 678
- Joined: July 8th, 2014, 7:12 am
Post
by DJ-Melo » July 5th, 2019, 8:00 am
DJ-Melo wrote: ↑July 4th, 2019, 3:26 pm
Arne.F wrote: ↑July 4th, 2019, 2:28 pm
Ups. Da fehlt ein Hilfe Text. Normal sollte dort eine Erklärung kommen welche Parameter das script kennt. Mach mal nen Bug auf.
Versuch mal
dann sollte er den Board typ usw. anzeigen und mit
dann flashen.
das funktioniert danke
Bug 12114
-
Hellfire
- Posts: 697
- Joined: November 8th, 2015, 8:54 am
Post
by Hellfire » August 6th, 2019, 8:11 am
Hi,
habe gerade nach einem Core134 Update auch versucht die Firmware für mein apu2c4 zu aktualisieren, dies schlug aber fehl:
Code: Select all
[root@ipfire ~]# firmware-update info
Board : PC Engines APU2
HW Version : 1.0
Serial : 116xxxxx
BIOS Version: 4.0.7 (02/28/2017)
[root@ipfire ~]# firmware-update update
Detected PC Engines APU2 running BIOS version 4.0.7
Unkown vendor: PC Engines
Support for this vendor might not have been implement, yet
[root@ipfire ~]#
Vielleicht auch noch interessant:
Code: Select all
# dmidecode 3.1
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.
7 structures occupying 305 bytes.
Table at 0xDFFB7020.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: coreboot
Version: 4.0.7
Release Date: 02/28/2017
ROM Size: 8192 kB
Characteristics:
PCI is supported
PC Card (PCMCIA) is supported
BIOS is upgradeable
Selectable boot is supported
ACPI is supported
Targeted content distribution is supported
BIOS Revision: 4.0
Firmware Revision: 0.0
Mache ich da was falsch?
Last edited by
Hellfire on August 6th, 2019, 8:15 am, edited 1 time in total.
-
DJ-Melo
- Posts: 678
- Joined: July 8th, 2014, 7:12 am
Post
by DJ-Melo » August 6th, 2019, 8:14 am
sind die Addons firmware-update, flashrom und pcengines-apu-firmware installiert?
-
Hellfire
- Posts: 697
- Joined: November 8th, 2015, 8:54 am
Post
by Hellfire » August 6th, 2019, 9:22 am
DJ-Melo wrote: ↑August 6th, 2019, 8:14 am
sind die Addons firmware-update, flashrom und pcengines-apu-firmware installiert?
Yo, alle drei vorhanden, wurden wohl mit der Installation des Pakets "pcengines-apu-firmware-4.9. 0.3-1" automatisch installiert. Zumindest ist dies so laut den Logs.
Evtl. ist das ein Problem:
Code: Select all
PAKFIRE INFO: Pakfire has finished. Closing.
10:04:45 pakfire: PAKFIRE RESV: flashrom: Resolving dependencies...
10:04:45 pakfire: Giving up: There was no chance to get the file meta/meta-flashrom from any avai lable server. There was an error on the way. Please fix it.
10:04:45 pakfire: DOWNLOAD INFO: HTTP-Status-Code: 500 - 500 Can't connect to www.mirrorservice.o rg:443 (Bad hostname 'www.mirrorservice.org')
-
DJ-Melo
- Posts: 678
- Joined: July 8th, 2014, 7:12 am
Post
by DJ-Melo » August 6th, 2019, 9:54 am
der antwortet zumindest hier
Code: Select all
PING mirrorservice.org (212.219.56.184) 56(84) bytes of data.
64 bytes from www.mirrorservice.org (212.219.56.184): icmp_seq=1 ttl=48 time=29.1 ms
64 bytes from www.mirrorservice.org (212.219.56.184): icmp_seq=2 ttl=48 time=30.0 ms
64 bytes from www.mirrorservice.org (212.219.56.184): icmp_seq=3 ttl=48 time=29.5 ms
64 bytes from www.mirrorservice.org (212.219.56.184): icmp_seq=4 ttl=48 time=26.8 ms
64 bytes from www.mirrorservice.org (212.219.56.184): icmp_seq=5 ttl=48 time=29.8 ms
64 bytes from www.mirrorservice.org (212.219.56.184): icmp_seq=6 ttl=48 time=28.9 ms
64 bytes from www.mirrorservice.org (212.219.56.184): icmp_seq=7 ttl=48 time=26.8 ms
64 bytes from www.mirrorservice.org (212.219.56.184): icmp_seq=8 ttl=48 time=28.2 ms
64 bytes from www.mirrorservice.org (212.219.56.184): icmp_seq=9 ttl=48 time=27.2 ms
64 bytes from www.mirrorservice.org (212.219.56.184): icmp_seq=10 ttl=48 time=33.9 ms
64 bytes from www.mirrorservice.org (212.219.56.184): icmp_seq=11 ttl=48 time=28.4 ms