"update-bootloader" fehlt?!

Post Reply
lenny
Posts: 406
Joined: October 4th, 2011, 12:47 pm

"update-bootloader" fehlt?!

Post by lenny » March 19th, 2019, 6:39 pm

Hi,
ich wollte gerade GRUB anpassen und stelle fest, dass der Befehl update-bootloader nicht existiert?!
Ist das Absicht?

User avatar
Extinguisher
Posts: 7
Joined: December 5th, 2015, 7:45 pm
Location: Stuttgart

Re: "update-bootloader" fehlt?!

Post by Extinguisher » March 24th, 2019, 3:48 pm

Code: Select all

grub-mkconfig -o /boot/grub/grub.cfg
funktioniert wunderbar bei mir.
MichaelTremer hatte das mal hier gepostet.
Image

User avatar
MichaelTremer
Core Developer
Core Developer
Posts: 5799
Joined: August 11th, 2005, 9:02 am

Re: "update-bootloader" fehlt?!

Post by MichaelTremer » March 25th, 2019, 12:32 pm

Ich glaub "update-bootloader" ist ein Befehl aus dem Debian-Baukasten. IPFire hat den nicht, aber das was mein Vorposter geschrieben hat passt.
Support the project with our Donation Challenge!

Get Commercial Support for IPFire and more from Lightning Wire Labs!

Image

lenny
Posts: 406
Joined: October 4th, 2011, 12:47 pm

Re: "update-bootloader" fehlt?!

Post by lenny » March 25th, 2019, 12:36 pm

okeay, dankeschön!

Weil Arne hier sowas schrieb:
viewtopic.php?f=6&t=22019#p121039

User avatar
Arne.F
Core Developer
Core Developer
Posts: 8522
Joined: May 7th, 2006, 8:57 am
Location: BS <-> NDH
Contact:

Re: "update-bootloader" fehlt?!

Post by Arne.F » March 26th, 2019, 5:57 am

Das script hatten wir aber ... Schau mal wer das ausgebaut hat ;)

https://git.ipfire.org/?p=ipfire-2.x.gi ... ab6afe2ab9
Arne

Support the project on the donation!

Image

Image

Image
PS: I will not answer support questions via email and ignore IPFire related messages on my non IPFire.org mail addresses.

lenny
Posts: 406
Joined: October 4th, 2011, 12:47 pm

Re: "update-bootloader" fehlt?!

Post by lenny » March 26th, 2019, 6:02 am

Herrlich >:D
Danke für die Info, ich dachte schon, meine Installation ist nicht sauber...

User avatar
MichaelTremer
Core Developer
Core Developer
Posts: 5799
Joined: August 11th, 2005, 9:02 am

Re: "update-bootloader" fehlt?!

Post by MichaelTremer » March 26th, 2019, 10:45 am

Arne.F wrote:
March 26th, 2019, 5:57 am
Das script hatten wir aber ... Schau mal wer das ausgebaut hat ;)

https://git.ipfire.org/?p=ipfire-2.x.gi ... ab6afe2ab9
Ich erinnere mich oft nicht mehr was ich gestern getan habe :)
Support the project with our Donation Challenge!

Get Commercial Support for IPFire and more from Lightning Wire Labs!

Image

lenny
Posts: 406
Joined: October 4th, 2011, 12:47 pm

Re: "update-bootloader" fehlt?!

Post by lenny » March 28th, 2019, 7:10 pm

wie muss denn die aktuelle grub conf aussehen, wenn man es per rs232 anzeigen lassen will??

User avatar
MichaelTremer
Core Developer
Core Developer
Posts: 5799
Joined: August 11th, 2005, 9:02 am

Re: "update-bootloader" fehlt?!

Post by MichaelTremer » March 29th, 2019, 2:21 pm

Hi,

das steht schon in /etc/default/grub drin. Einfach die beiden kommentierten Zeilen auskommentieren, bei der Kernel-Kommandozeile dann "console=ttyS0,115200" einfügen und dann die Config neu generieren.
Support the project with our Donation Challenge!

Get Commercial Support for IPFire and more from Lightning Wire Labs!

Image

lenny
Posts: 406
Joined: October 4th, 2011, 12:47 pm

Re: "update-bootloader" fehlt?!

Post by lenny » March 29th, 2019, 5:28 pm

so:?

Code: Select all

GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
GRUB_DEFAULT=saved
GRUB_CMDLINE_LINUX="panic=10,console=ttyS0,115200n8"
GRUB_DISABLE_RECOVERY="true"
GRUB_BACKGROUND="/boot/grub/splash.png"
GRUB_TERMINAL="serial"
GRUB_SERIAL_COMMAND="serial --unit=0 --speed=115200"

User avatar
MichaelTremer
Core Developer
Core Developer
Posts: 5799
Joined: August 11th, 2005, 9:02 am

Re: "update-bootloader" fehlt?!

Post by MichaelTremer » March 29th, 2019, 5:36 pm

lenny wrote:
March 29th, 2019, 5:28 pm
so:?

Code: Select all

GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
GRUB_DEFAULT=saved
GRUB_CMDLINE_LINUX="panic=10,console=ttyS0,115200n8"
GRUB_DISABLE_RECOVERY="true"
GRUB_BACKGROUND="/boot/grub/splash.png"
GRUB_TERMINAL="serial"
GRUB_SERIAL_COMMAND="serial --unit=0 --speed=115200"
Ja fast... Mach das Komme zwischen panic= und console= noch weg. Einfach nur ein Leerzeichen an der Stelle...
Support the project with our Donation Challenge!

Get Commercial Support for IPFire and more from Lightning Wire Labs!

Image

lenny
Posts: 406
Joined: October 4th, 2011, 12:47 pm

Re: "update-bootloader" fehlt?!

Post by lenny » March 29th, 2019, 6:42 pm

Klasse, vielen Dank :)

Post Reply