SABnzbd+ auf IPFire?

[morgenland]

Gibt es da was neues, ich würde mich echt über sabnzbd als ADDON freuen,
würde sogar was dafür Spenden...

[gerdh]

Suche mal hier im Forum.. ich glaube mich zu erinnern das es einer hier hat...

gruss gerd

[morgenland]

ne, leider nicht..das ist das einzige Posting hier,
schein wohl nicht zu laufen....
Schade, wer weiss vielleicht kommt es irgendwann

[ummeegge]

Hallo zusammen,
ich bekomme es derzeit nur in der IPFire Buildumgebung (chroot environment) zum Laufen, auf meinem Testfire (unter normaler Umgebung) will SABnzbd nicht, es gibt folgende Fehlermeldung:

Code: Select all

import strop # dynamically loaded from /usr/lib/python2.7/lib-dynload/strop.so
The Python module Cheetah is required

auf dem Fire im chroot findet er Cheetah ?!?!

Code: Select all

dlopen("/usr/lib/python2.7/lib-dynload/strop.so", 2);
import strop # dynamically loaded from /usr/lib/python2.7/lib-dynload/strop.so
import Cheetah # directory /usr/lib/python2.7/site-packages/Cheetah-2.4.4-py2.7-linux-i586.egg/Cheetah
# /usr/lib/python2.7/site-packages/Cheetah-2.4.4-py2.7-linux-i586.egg/Cheetah/__init__.pyc matches /usr/lib/python2.7/site-packages/Cheetah-2.4.4-py2.7-linux-i586.egg/Cheetah/__init__.py
import Cheetah # precompiled from /usr/lib/python2.7/site-packages/Cheetah-2.4.4-py2.7-linux-i586.egg/Cheetah/__init__.pyc
# /usr/lib/python2.7/site-packages/Cheetah-2.4.4-py2.7-linux-i586.egg/Cheetah/Version.pyc matches /usr/lib/python2.7/site-packages/Cheetah-2.4.4-py2.7-linux-i586.egg/Cheetah/Version.py
import Cheetah.Version # precompiled from /usr/lib/python2.7/site-packages/Cheetah-2.4.4-py2.7-linux-i586.egg/Cheetah/Version.pyc

laufen tut er hier...

Code: Select all

root     14940  0.0  0.0   7372  2012 ?        SNs  15:56   0:00 elinks http://localhost:8080/sabnzbd

Unter dem Verzeichnispfad ist Cheetah auch auf dem testfire installiert, laufen tut er da halt nicht es gibt nur obige Fehlermeldung.

Irgendwas fehlt im da, bin noch nicht dahinter gestiegen was das ist, habe mit SABnzbd auch eigentlich gar nichts zu tun, von daher fällt euch ja hierzu vielleicht was ein ?!?!

Ich hatte die *.ipfire Pakete schon mal hier reingestellt, sie aber auch wieder rausgeschmissen da es auch keine Rückmeldung von euch gab.

Wenn das mal einer von euch probieren will, findet er sie hier --> http://people.ipfire.org/~ummeegge/SABnzbd/ . Da ist jetzt par, Cheetah, pyOpenSSl, unrar, yenc und SABnzbd zu finden.

Installiert wird hier falls ihr die wieder löschen wollt:

par-v1.1 unter:
/usr/bin/par

Cheetah unter:
/usr/bin/cheetah-analyze \
/usr/bin/cheetah-compile \
/usr/bin/markdown_py \
/usr/bin/cheetah \
/usr/lib/python2.7/site-packages/Cheetah-2.4.4-py2.7-linux-i586.egg/ \
/usr/lib/python2.7/site-packages/Cheetah-2.4.4-py2.7-linux-i586.egg/Cheetah/ \
/usr/lib/python2.7/site-packages/Cheetah-2.4.4-py2.7-linux-i586.egg/EGG-INFO/ \
/usr/lib/python2.7/site-packages/Markdown-2.3.1-py2.7.egg

yenc unter:
/usr/lib/python2.7/site-packages/_yenc.so \
/usr/lib/python2.7/site-packages/yenc.py \
/usr/lib/python2.7/site-packages/yenc-0.3-py2.7.egg-info \
/usr/lib/python2.7/site-packages/yenc.pyc

unrar unter:
/usr/bin/unrar

pyOpenSSL unter:
/usr/lib/python2.7/site-packages/pyOpenSSL-0.13.1-py2.7.egg-info \
/usr/lib/python2.7/site-packages/OpenSSL

SABnzbd unter:
/srv/web/SABnzbd

Grüsse

UE

EDIT: Es braucht auf jeden Fall elinks damit ihr von localhost (IPFire) aus den Wizard starten könnt.

[ummeegge]

Ursache gefunden,
es fehlen die Python-setuptools --> http://git.ipfire.org/?p=ipfire-2.x.git ... 7e;hb=HEAD auf dem Fire, welche in der Buildumgebung vorhanden sind.

Habe die mal rüberkopiert und nun läuft SABnzbd:

Der Wizard:

Code: Select all

To start SABnzbd press [Enter]
2013-10-13 11:34:24,023::INFO::[SABnzbd:1256] --------------------------------
2013-10-13 11:34:24,024::INFO::[SABnzbd:1257] SABnzbd.py-0.7.16 (rev=14f39a21e3aa063d128f16505032e759c7ba3265)
2013-10-13 11:34:24,025::INFO::[SABnzbd:1269] Platform = posix
2013-10-13 11:34:24,026::INFO::[SABnzbd:1270] Python-version = 2.7.3 (default, May 22 2013, 13:15:55) 
[GCC 4.4.7]
2013-10-13 11:34:24,027::INFO::[SABnzbd:1271] Arguments = SABnzbd.py
2013-10-13 11:34:24,028::INFO::[SABnzbd:1284] Read INI file /root/.sabnzbd/sabnzbd.ini
2013-10-13 11:34:24,033::INFO::[__init__:928] Loading data for bookmarks.sab from /root/.sabnzbd/admin/bookmarks.sab
2013-10-13 11:34:24,034::INFO::[__init__:928] Loading data for rss_data.sab from /root/.sabnzbd/admin/rss_data.sab
2013-10-13 11:34:24,036::INFO::[__init__:928] Loading data for totals9.sab from /root/.sabnzbd/admin/totals9.sab
2013-10-13 11:34:24,037::INFO::[__init__:931] /root/.sabnzbd/admin/totals9.sab missing, trying old cache
2013-10-13 11:34:24,038::INFO::[__init__:934] /root/.sabnzbd/cache/totals9.sab missing
2013-10-13 11:34:24,146::INFO::[postproc:90] Loading postproc queue
2013-10-13 11:34:24,147::INFO::[__init__:928] Loading data for postproc1.sab from /root/.sabnzbd/admin/postproc1.sab
2013-10-13 11:34:24,150::INFO::[__init__:928] Loading data for queue9.sab from /root/.sabnzbd/admin/queue9.sab
2013-10-13 11:34:24,152::INFO::[__init__:928] Loading data for watched_data.sab from /root/.sabnzbd/admin/watched_data.sab
2013-10-13 11:34:24,155::INFO::[scheduler:172] Setting schedule for midnight BPS reset
2013-10-13 11:34:24,157::INFO::[downloader:211] Resuming
2013-10-13 11:34:24,184::INFO::[__init__:330] All processes started
2013-10-13 11:34:24,186::INFO::[SABnzbd:334] Web dir is /var/ipfire/SABnzbd/interfaces/Plush
2013-10-13 11:34:24,187::INFO::[SABnzbd:334] Web dir is /var/ipfire/SABnzbd/interfaces/Config
2013-10-13 11:34:24,215::INFO::[SABnzbd:463] _yenc module... found!
2013-10-13 11:34:24,216::ERROR::[SABnzbd:473] par2 binary... NOT found!
2013-10-13 11:34:24,217::INFO::[SABnzbd:479] unrar binary... found (/usr/bin/unrar)
2013-10-13 11:34:24,218::INFO::[SABnzbd:484] unzip binary... found (/usr/bin/unzip)
2013-10-13 11:34:24,219::INFO::[SABnzbd:490] nice binary... found (/bin/nice)
2013-10-13 11:34:24,220::INFO::[SABnzbd:496] ionice binary... NOT found!
2013-10-13 11:34:24,221::INFO::[SABnzbd:499] pyOpenSSL... found (True)
2013-10-13 11:34:24,225::INFO::[SABnzbd:1483] Starting web-interface on localhost:8080
2013-10-13 11:34:24,227::INFO::[_cplogging:55] [13/Oct/2013:11:34:24] ENGINE Bus STARTING
2013-10-13 11:34:24,239::INFO::[_cplogging:55] [13/Oct/2013:11:34:24] ENGINE Started monitor thread '_TimeoutMonitor'.
2013-10-13 11:34:24,444::INFO::[_cplogging:55] [13/Oct/2013:11:34:24] ENGINE Serving on localhost:8080
2013-10-13 11:34:24,447::INFO::[_cplogging:55] [13/Oct/2013:11:34:24] ENGINE Bus STARTED
2013-10-13 11:34:24,448::INFO::[panic:247] Lauching browser with http://localhost:8080/sabnzbd

und die WUI:

Code: Select all

2013-10-13 11:31:52,564::INFO::[SABnzbd:1256] --------------------------------
2013-10-13 11:31:52,565::INFO::[SABnzbd:1257] SABnzbd.py-0.7.16 (rev=14f39a21e3aa063d128f16505032e759c7ba3265)
2013-10-13 11:31:52,566::INFO::[SABnzbd:1269] Platform = posix
2013-10-13 11:31:52,567::INFO::[SABnzbd:1270] Python-version = 2.7.3 (default, May 22 2013, 13:15:55) 
[GCC 4.4.7]
2013-10-13 11:31:52,567::INFO::[SABnzbd:1271] Arguments = SABnzbd.py
2013-10-13 11:31:52,568::INFO::[SABnzbd:1284] Read INI file /root/.sabnzbd/sabnzbd.ini
2013-10-13 11:31:52,570::INFO::[misc:369] download_dir directory: /root/Downloads/incomplete does not exist, try to create it
2013-10-13 11:31:52,574::INFO::[__init__:928] Loading data for bookmarks.sab from /root/.sabnzbd/admin/bookmarks.sab
2013-10-13 11:31:52,575::INFO::[__init__:931] /root/.sabnzbd/admin/bookmarks.sab missing, trying old cache
2013-10-13 11:31:52,576::INFO::[__init__:934] /root/.sabnzbd/cache/bookmarks.sab missing
2013-10-13 11:31:52,578::INFO::[__init__:928] Loading data for rss_data.sab from /root/.sabnzbd/admin/rss_data.sab
2013-10-13 11:31:52,579::INFO::[__init__:931] /root/.sabnzbd/admin/rss_data.sab missing, trying old cache
2013-10-13 11:31:52,580::INFO::[__init__:934] /root/.sabnzbd/cache/rss_data.sab missing
2013-10-13 11:31:52,581::INFO::[__init__:928] Loading data for totals9.sab from /root/.sabnzbd/admin/totals9.sab
2013-10-13 11:31:52,582::INFO::[__init__:931] /root/.sabnzbd/admin/totals9.sab missing, trying old cache
2013-10-13 11:31:52,583::INFO::[__init__:934] /root/.sabnzbd/cache/totals9.sab missing
2013-10-13 11:31:52,693::INFO::[postproc:90] Loading postproc queue
2013-10-13 11:31:52,695::INFO::[__init__:928] Loading data for postproc1.sab from /root/.sabnzbd/admin/postproc1.sab
2013-10-13 11:31:52,695::INFO::[__init__:931] /root/.sabnzbd/admin/postproc1.sab missing, trying old cache
2013-10-13 11:31:52,697::INFO::[__init__:934] /root/.sabnzbd/cache/postproc1.sab missing
2013-10-13 11:31:52,699::INFO::[__init__:928] Loading data for queue9.sab from /root/.sabnzbd/admin/queue9.sab
2013-10-13 11:31:52,700::INFO::[__init__:931] /root/.sabnzbd/admin/queue9.sab missing, trying old cache
2013-10-13 11:31:52,701::INFO::[__init__:934] /root/.sabnzbd/cache/queue9.sab missing
2013-10-13 11:31:52,703::INFO::[__init__:928] Loading data for watched_data.sab from /root/.sabnzbd/admin/watched_data.sab
2013-10-13 11:31:52,704::INFO::[__init__:931] /root/.sabnzbd/admin/watched_data.sab missing, trying old cache
2013-10-13 11:31:52,705::INFO::[__init__:934] /root/.sabnzbd/cache/watched_data.sab missing
2013-10-13 11:31:52,708::INFO::[scheduler:172] Setting schedule for midnight BPS reset
2013-10-13 11:31:52,709::INFO::[downloader:211] Resuming
2013-10-13 11:31:52,738::INFO::[__init__:330] All processes started
2013-10-13 11:31:52,739::INFO::[SABnzbd:334] Web dir is /var/ipfire/SABnzbd/interfaces/Plush
2013-10-13 11:31:52,741::INFO::[SABnzbd:334] Web dir is /var/ipfire/SABnzbd/interfaces/Config
2013-10-13 11:31:52,768::INFO::[SABnzbd:463] _yenc module... found!
2013-10-13 11:31:52,769::ERROR::[SABnzbd:473] par2 binary... NOT found!
2013-10-13 11:31:52,770::INFO::[SABnzbd:479] unrar binary... found (/usr/bin/unrar)
2013-10-13 11:31:52,771::INFO::[SABnzbd:484] unzip binary... found (/usr/bin/unzip)
2013-10-13 11:31:52,772::INFO::[SABnzbd:490] nice binary... found (/bin/nice)
2013-10-13 11:31:52,773::INFO::[SABnzbd:496] ionice binary... NOT found!
2013-10-13 11:31:52,773::INFO::[SABnzbd:499] pyOpenSSL... found (True)
2013-10-13 11:31:52,778::INFO::[SABnzbd:1483] Starting web-interface on localhost:8080
2013-10-13 11:31:52,780::INFO::[_cplogging:55] [13/Oct/2013:11:31:52] ENGINE Bus STARTING
2013-10-13 11:31:52,792::INFO::[_cplogging:55] [13/Oct/2013:11:31:52] ENGINE Started monitor thread '_TimeoutMonitor'.
2013-10-13 11:31:52,897::INFO::[_cplogging:55] [13/Oct/2013:11:31:52] ENGINE Serving on localhost:8080
2013-10-13 11:31:52,899::INFO::[_cplogging:55] [13/Oct/2013:11:31:52] ENGINE Bus STARTED
2013-10-13 11:31:52,900::INFO::[panic:247] Lauching browser with http://localhost:8080/sabnzbd
2013-10-13 11:31:54,741::INFO::[SABnzbd:1552] Starting SABnzbd.py-0.7.16
2013-10-13 11:31:54,745::INFO::[dirscanner:274] Dirscanner starting up
2013-10-13 11:31:54,748::INFO::[urlgrabber:77] URLGrabber starting up
2013-10-13 11:32:25,144::WARNING::[__init__:169] Signal 2 caught, saving and exiting...
2013-10-13 11:32:25,145::INFO::[nzbqueue:211] Saving queue
2013-10-13 11:32:25,146::INFO::[__init__:904] Saving data for queue9.sab in /root/.sabnzbd/admin/queue9.sab
2013-10-13 11:32:25,148::INFO::[__init__:904] Saving data for rss_data.sab in /root/.sabnzbd/admin/rss_data.sab
2013-10-13 11:32:25,149::INFO::[__init__:904] Saving data for bookmarks.sab in /root/.sabnzbd/admin/bookmarks.sab
2013-10-13 11:32:25,151::INFO::[__init__:904] Saving data for watched_data.sab in /root/.sabnzbd/admin/watched_data.sab
2013-10-13 11:32:25,152::INFO::[postproc:84] Saving postproc queue
2013-10-13 11:32:25,153::INFO::[__init__:904] Saving data for postproc1.sab in /root/.sabnzbd/admin/postproc1.sab
2013-10-13 11:34:24,023::INFO::[SABnzbd:1256] --------------------------------
2013-10-13 11:34:24,024::INFO::[SABnzbd:1257] SABnzbd.py-0.7.16 (rev=14f39a21e3aa063d128f16505032e759c7ba3265)
2013-10-13 11:34:24,025::INFO::[SABnzbd:1269] Platform = posix
2013-10-13 11:34:24,026::INFO::[SABnzbd:1270] Python-version = 2.7.3 (default, May 22 2013, 13:15:55) 
[GCC 4.4.7]
2013-10-13 11:34:24,027::INFO::[SABnzbd:1271] Arguments = SABnzbd.py
2013-10-13 11:34:24,028::INFO::[SABnzbd:1284] Read INI file /root/.sabnzbd/sabnzbd.ini
2013-10-13 11:34:24,033::INFO::[__init__:928] Loading data for bookmarks.sab from /root/.sabnzbd/admin/bookmarks.sab
2013-10-13 11:34:24,034::INFO::[__init__:928] Loading data for rss_data.sab from /root/.sabnzbd/admin/rss_data.sab
2013-10-13 11:34:24,036::INFO::[__init__:928] Loading data for totals9.sab from /root/.sabnzbd/admin/totals9.sab
2013-10-13 11:34:24,037::INFO::[__init__:931] /root/.sabnzbd/admin/totals9.sab missing, trying old cache
2013-10-13 11:34:24,038::INFO::[__init__:934] /root/.sabnzbd/cache/totals9.sab missing
2013-10-13 11:34:24,146::INFO::[postproc:90] Loading postproc queue
2013-10-13 11:34:24,147::INFO::[__init__:928] Loading data for postproc1.sab from /root/.sabnzbd/admin/postproc1.sab
2013-10-13 11:34:24,150::INFO::[__init__:928] Loading data for queue9.sab from /root/.sabnzbd/admin/queue9.sab
2013-10-13 11:34:24,152::INFO::[__init__:928] Loading data for watched_data.sab from /root/.sabnzbd/admin/watched_data.sab
2013-10-13 11:34:24,155::INFO::[scheduler:172] Setting schedule for midnight BPS reset
2013-10-13 11:34:24,157::INFO::[downloader:211] Resuming
2013-10-13 11:34:24,184::INFO::[__init__:330] All processes started
2013-10-13 11:34:24,186::INFO::[SABnzbd:334] Web dir is /var/ipfire/SABnzbd/interfaces/Plush
2013-10-13 11:34:24,187::INFO::[SABnzbd:334] Web dir is /var/ipfire/SABnzbd/interfaces/Config
2013-10-13 11:34:24,215::INFO::[SABnzbd:463] _yenc module... found!
2013-10-13 11:34:24,216::ERROR::[SABnzbd:473] par2 binary... NOT found!
2013-10-13 11:34:24,217::INFO::[SABnzbd:479] unrar binary... found (/usr/bin/unrar)
2013-10-13 11:34:24,218::INFO::[SABnzbd:484] unzip binary... found (/usr/bin/unzip)
2013-10-13 11:34:24,219::INFO::[SABnzbd:490] nice binary... found (/bin/nice)
2013-10-13 11:34:24,220::INFO::[SABnzbd:496] ionice binary... NOT found!
2013-10-13 11:34:24,221::INFO::[SABnzbd:499] pyOpenSSL... found (True)
2013-10-13 11:34:24,225::INFO::[SABnzbd:1483] Starting web-interface on localhost:8080
2013-10-13 11:34:24,227::INFO::[_cplogging:55] [13/Oct/2013:11:34:24] ENGINE Bus STARTING
2013-10-13 11:34:24,239::INFO::[_cplogging:55] [13/Oct/2013:11:34:24] ENGINE Started monitor thread '_TimeoutMonitor'.
2013-10-13 11:34:24,444::INFO::[_cplogging:55] [13/Oct/2013:11:34:24] ENGINE Serving on localhost:8080
2013-10-13 11:34:24,447::INFO::[_cplogging:55] [13/Oct/2013:11:34:24] ENGINE Bus STARTED
2013-10-13 11:34:24,448::INFO::[panic:247] Lauching browser with http://localhost:8080/sabnzbd
2013-10-13 11:39:14,253::WARNING::[__init__:169] Signal 2 erkannt. Speichern und beenden...
2013-10-13 11:39:14,254::INFO::[nzbqueue:211] Saving queue
2013-10-13 11:39:14,255::INFO::[__init__:904] Saving data for queue9.sab in /root/.sabnzbd/admin/queue9.sab
2013-10-13 11:39:14,257::INFO::[__init__:904] Saving data for rss_data.sab in /root/.sabnzbd/admin/rss_data.sab
2013-10-13 11:39:14,258::INFO::[__init__:904] Saving data for bookmarks.sab in /root/.sabnzbd/admin/bookmarks.sab
2013-10-13 11:39:14,260::INFO::[__init__:904] Saving data for watched_data.sab in /root/.sabnzbd/admin/watched_data.sab
2013-10-13 11:39:14,262::INFO::[postproc:84] Saving postproc queue
2013-10-13 11:39:14,263::INFO::[__init__:904] Saving data for postproc1.sab in /root/.sabnzbd/admin/postproc1.sab
2013-10-13 12:46:04,554::INFO::[SABnzbd:1256] --------------------------------
2013-10-13 12:46:04,555::INFO::[SABnzbd:1257] SABnzbd.py-0.7.16 (rev=14f39a21e3aa063d128f16505032e759c7ba3265)
2013-10-13 12:46:04,556::INFO::[SABnzbd:1269] Platform = posix
2013-10-13 12:46:04,557::INFO::[SABnzbd:1270] Python-version = 2.7.3 (default, May 22 2013, 13:15:55) 
[GCC 4.4.7]
2013-10-13 12:46:04,558::INFO::[SABnzbd:1271] Arguments = SABnzbd.py
2013-10-13 12:46:04,558::INFO::[SABnzbd:1284] Read INI file /root/.sabnzbd/sabnzbd.ini
2013-10-13 12:46:04,613::INFO::[__init__:928] Loading data for bookmarks.sab from /root/.sabnzbd/admin/bookmarks.sab
2013-10-13 12:46:04,615::INFO::[__init__:928] Loading data for rss_data.sab from /root/.sabnzbd/admin/rss_data.sab
2013-10-13 12:46:04,616::INFO::[__init__:928] Loading data for totals9.sab from /root/.sabnzbd/admin/totals9.sab
2013-10-13 12:46:04,617::INFO::[__init__:931] /root/.sabnzbd/admin/totals9.sab missing, trying old cache
2013-10-13 12:46:04,618::INFO::[__init__:934] /root/.sabnzbd/cache/totals9.sab missing
2013-10-13 12:46:04,709::INFO::[postproc:90] Loading postproc queue
2013-10-13 12:46:04,710::INFO::[__init__:928] Loading data for postproc1.sab from /root/.sabnzbd/admin/postproc1.sab
2013-10-13 12:46:04,712::INFO::[__init__:928] Loading data for queue9.sab from /root/.sabnzbd/admin/queue9.sab
2013-10-13 12:46:04,715::INFO::[__init__:928] Loading data for watched_data.sab from /root/.sabnzbd/admin/watched_data.sab
2013-10-13 12:46:04,718::INFO::[scheduler:172] Setting schedule for midnight BPS reset
2013-10-13 12:46:04,720::INFO::[downloader:211] Resuming
2013-10-13 12:46:04,749::INFO::[__init__:330] All processes started
2013-10-13 12:46:04,750::INFO::[SABnzbd:334] Web dir is /var/ipfire/SABnzbd/interfaces/Plush
2013-10-13 12:46:04,752::INFO::[SABnzbd:334] Web dir is /var/ipfire/SABnzbd/interfaces/Config
2013-10-13 12:46:04,781::INFO::[SABnzbd:463] _yenc module... found!
2013-10-13 12:46:04,782::ERROR::[SABnzbd:473] par2-Programmdatei nicht gefunden!
2013-10-13 12:46:04,783::INFO::[SABnzbd:479] unrar binary... found (/usr/bin/unrar)
2013-10-13 12:46:04,784::INFO::[SABnzbd:484] unzip binary... found (/usr/bin/unzip)
2013-10-13 12:46:04,785::INFO::[SABnzbd:490] nice binary... found (/bin/nice)
2013-10-13 12:46:04,786::INFO::[SABnzbd:496] ionice binary... NOT found!
2013-10-13 12:46:04,787::INFO::[SABnzbd:499] pyOpenSSL... found (True)
2013-10-13 12:46:05,389::INFO::[SABnzbd:1483] Starting web-interface on 0.0.0.0:9090
2013-10-13 12:46:05,391::INFO::[_cplogging:55] [13/Oct/2013:12:46:05] ENGINE Bus STARTING
2013-10-13 12:46:05,403::INFO::[_cplogging:55] [13/Oct/2013:12:46:05] ENGINE Started monitor thread '_TimeoutMonitor'.
2013-10-13 12:46:05,507::INFO::[_cplogging:55] [13/Oct/2013:12:46:05] ENGINE Serving on 0.0.0.0:8080
2013-10-13 12:46:05,612::INFO::[_cplogging:55] [13/Oct/2013:12:46:05] ENGINE Serving on 0.0.0.0:9090
2013-10-13 12:46:05,615::INFO::[_cplogging:55] [13/Oct/2013:12:46:05] ENGINE Bus STARTED
2013-10-13 12:46:05,616::INFO::[panic:247] Lauching browser with https://localhost:9090/sabnzbd

ionice und par2 werden noch angemeckert (nicht vorhanden), scheint so als ob er par-v1.1 nicht leiden mag.

Dennoch funktioniert der Zugriff auch aus dem LAN, sofern im Wizard konfiguriert, auch mit https, Login und die ganzen Menüs).

UE

EDIT: Sicherheitstechnisch denke ich ist das alles ziemlich bedenklich auf einer Firewall, aber wem sag ich das  ...
EDIT2: Screenshoots