Help on building IPFire & Feature Requests
-
ummeegge
- Community Developer

- Posts: 5001
- Joined: October 9th, 2010, 10:00 am
Post
by ummeegge » December 19th, 2018, 2:46 pm
Thanks for the flowers

, good to hear that it works so far.
Best,
UE
-
ummeegge
- Community Developer

- Posts: 5001
- Joined: October 9th, 2010, 10:00 am
Post
by ummeegge » January 18th, 2019, 7:14 am
Hi all,
updates to ntopng 3.8 and nDPI 2.7, both are now from the stable tree (development versions has been dropped) and a redis update to 5.0.3 (new config) are available now.
Since this here provided version 32bit platforms are not supported anymore but you can download an old 32bit version from here -->
https://people.ipfire.org/~ummeegge/ntopng/old/ which you need to install by your own.
As ever for updates or fresh installation, use the commands from the starting topic -->
viewtopic.php?f=50&t=19565#p111061 .
The changelogs can be found in here for ntopng-3.8 -->
https://github.com/ntop/ntopng/blob/dev/CHANGELOG.md , for nDPI here -->
https://github.com/ntop/nDPI/blob/dev/CHANGELOG.md , for redis-5.0.3 here -->
https://raw.githubusercontent.com/antir ... LEASENOTES .
Keep in mind that the provided version in here is a community version and a lot of announced changes are not available.
Best,
UE
-
Antaris
- Posts: 17
- Joined: November 1st, 2013, 10:07 pm
Post
by Antaris » March 23rd, 2019, 10:17 am
Hi UE,
Thaks for the good tool and geep up!
Will this ever be integrated in the Packfire plugins, or i must put it in my favorites?
-
ummeegge
- Community Developer

- Posts: 5001
- Joined: October 9th, 2010, 10:00 am
Post
by ummeegge » March 23rd, 2019, 4:23 pm
Hi Antaris,
and thanks for your positive feedback.
Antaris wrote: ↑March 23rd, 2019, 10:17 am
Will this ever be integrated in the Packfire plugins, or i must put it in my favorites?
Have currently not found a good way to bring Redis on ARM system to life so there is an important platform missing which is needed for IPFire. May this comes in a closer future but am not sure about this. So long i try to keep it here up-to-date.
Best,
UE
-
ummeegge
- Community Developer

- Posts: 5001
- Joined: October 9th, 2010, 10:00 am
Post
by ummeegge » December 19th, 2019, 11:46 am
Hi all,
updated version with big version number jump to v.3.9.191712 (development version) [Community build] which includes updates for libmaxmind to version 1.4.2, redis to version 5.0.7, zeromq to version 4.3.2 and nDPI to version 3.1.191712 (development version) is up.
It is a development version with really a lot´s of changes and also a new surface. Haven´t checked all possibilities but at a first glance it works well here, keep nevertheless in mind that it is a DEV version. So if you want to stay save with your installation, you possibly don´t want install it ?!
For installation/update use the code block in the starting topic -->
viewtopic.php?f=50&t=19565#p111061 .
Best,
UE
-
Stefan87
- Posts: 75
- Joined: July 20th, 2017, 11:55 pm
Post
by Stefan87 » December 26th, 2019, 10:28 pm
I have update the ntopng whit some errors
Code: Select all
Set HTTPS access from green interface only to ntopng WI...
--------------------------------------------------------------------------------
sed: couldn't flush /etc/ntopng/sed5Fhqlc: No space left on device
Will start now ntopng...
Starting Traffic Analyzer and Flow Collector...
26/Dec/2019 23:24:32 [Prefs.cpp:1078] ntopng will use redis 127.0.0.1@3
26/Dec/2019 23:24:32 [Prefs.cpp:1445] ERROR: Unable to locate callbacks[ FAIL ]
--------------------------------------------------------------------------------
Have added now meta file for de- or activation via IPfire WUI ntopng on reboot.. .
--------------------------------------------------------------------------------
Process can´t be started please come to https://forum.ipfire.org/viewtopic.php?f =50&t=19565 , try then to help you.
Play backup of redis and ntopng configuration and db back
mv: cannot stat '/tmp/ntopng_bck/ntopng-cert.pem': No such file or directory
chown: invalid user: ‘ntopng:ntopng’
Stopping Traffic Analyzer and Flow Collector... Not running. [ OK ]
Starting Traffic Analyzer and Flow Collector...
26/Dec/2019 23:24:37 [Prefs.cpp:1078] ntopng will use redis 127.0.0.1@3
26/Dec/2019 23:24:37 [Prefs.cpp:1444] ERROR: Unable to locate scripts d[ FAIL ]
ls: cannot access '/usr/share/ntopng/httpdocs/geoip': No such file or directory
Update is finish now.
Something went wrong ntopng has NOT been started, please report this here --> ht tps://forum.ipfire.org/viewtopic.php?f=50&t=19565 will then try to help you.
edit i have new install ntopng and it works

-
ummeegge
- Community Developer

- Posts: 5001
- Joined: October 9th, 2010, 10:00 am
Post
by ummeegge » February 24th, 2020, 9:31 am
Hi Stefan,
am currently not sure what the problem was there.
ntopng Community Edition v.3.9.200223 is up but is still a dev version and includes again extensive changes but it seems to run pretty stable.
Best,
UE
ATTENTION: ALL NEWS WILL FROM NOW ON BE POSTED AT THE STARTING TOPIC
Any questions should be made on the community platform -->
https://community.ipfire.org/
Thanks to all the helping hands in here... GOOD JOB

.