ntopng for IPFire
Re: ntopng for IPFire
Hi all,
updated version has been uploaded with fixes for the password problem --> https://forum.ipfire.org/viewtopic.php? ... 45#p118356 --> https://github.com/ntop/ntopng/issues/1935 .
As usual, use the updated installer from start topic --> https://forum.ipfire.org/viewtopic.php? ... 65#p111061 .
Greetings,
UE
updated version has been uploaded with fixes for the password problem --> https://forum.ipfire.org/viewtopic.php? ... 45#p118356 --> https://github.com/ntop/ntopng/issues/1935 .
As usual, use the updated installer from start topic --> https://forum.ipfire.org/viewtopic.php? ... 65#p111061 .
Greetings,
UE
Re: ntopng for IPFire
Thank you ummeegge, gocart and others for your work on this!
I have been wanting to try ntopng for some time but haven't investigated it further.
The first post in this thread says:
Are both the "stable" and "development" versions of ntopng for IPFire being maintained?
If they are, could you please update the first post in this thread with a download link for the stable which gocart has released? (preferably an online repo)
PS I have loads of spare RAM on the system I'd use this on. I guess it would be wise for me to increase the limits on redis?
Thank you!
I have been wanting to try ntopng for some time but haven't investigated it further.
The first post in this thread says:
The problem is that gocart's version doesn't appear to have been updated (it's 3.4, but 3.6.1 is the latest stable version. It was released one month ago).ummeegge wrote: ↑October 1st, 2017, 10:19 amSince gocart has also build packages for ntopng (the stable not the dev version) on IPFire --> viewtopic.php?f=50&t=19565&start=15#p111142 (thanks gocart;) you have now the choice ;-)
Are both the "stable" and "development" versions of ntopng for IPFire being maintained?
If they are, could you please update the first post in this thread with a download link for the stable which gocart has released? (preferably an online repo)
PS I have loads of spare RAM on the system I'd use this on. I guess it would be wise for me to increase the limits on redis?
Thank you!
IPFire 2.x (Latest Update) on x86_64 Intel Bay Trail CPU, 4GiB RAM, RED + GREEN + BLUE + ORANGE
Re: ntopng for IPFire
Hi dnl,
I use the dev version since the beginning of this topic to stay tuned for may needed changes to keep the IPFire platform active in there and may also for feedback/try_to_fix with the ntop developers which happens several times (really a good support there).
I try always to test all version which i provide in here as good as possible which do not preserves 100% fault free but i think we could fix all problems in here. The current available IPFire version is 'v.3.7.180921' which is stable here since several weeks now.
Greetings,
UE
you can find gocart´s PAKS in here --> https://people.ipfire.org/~mlorenz/pak/ and they are currently up-to-date but there is no in- uninstaller for them available as far as i know, so you would need to install them by your own (they do have already a lot of logic in itself {in- uninstall.sh´s},... ), but possibly i´ am wrong there? May gocart can say something more actual in that manner? Will link then all info´s in the first post.dnl wrote: ↑November 17th, 2018, 10:32 amThe first post in this thread says:The problem is that gocart's version doesn't appear to have been updated (it's 3.4, but 3.6.1 is the latest stable version. It was released one month ago).ummeegge wrote: ↑October 1st, 2017, 10:19 amSince gocart has also build packages for ntopng (the stable not the dev version) on IPFire --> viewtopic.php?f=50&t=19565&start=15#p111142 (thanks gocart;) you have now the choice ;-)
Are both the "stable" and "development" versions of ntopng for IPFire being maintained?
If they are, could you please update the first post in this thread with a download link for the stable which gocart has released? (preferably an online repo)
I use the dev version since the beginning of this topic to stay tuned for may needed changes to keep the IPFire platform active in there and may also for feedback/try_to_fix with the ntop developers which happens several times (really a good support there).
I try always to test all version which i provide in here as good as possible which do not preserves 100% fault free but i think we could fix all problems in here. The current available IPFire version is 'v.3.7.180921' which is stable here since several weeks now.
i don´t think that you need to increase the redis limits if you use ntopng only, but new testings and all that might be nevertheless always nice.
Greetings,
UE
Re: ntopng for IPFire
Thank you for that ummeegge.
I'm trying to decide which version to use.
Are failures of ntopng likely to cause a problem for standard IPFire functions (routing/firewalling etc), or do they usually only cause ntopng itself to fail?
If problems usually only affect ntopng itself, then I'll help try your development version.
Thank you!
I'm trying to decide which version to use.
Are failures of ntopng likely to cause a problem for standard IPFire functions (routing/firewalling etc), or do they usually only cause ntopng itself to fail?
If problems usually only affect ntopng itself, then I'll help try your development version.
Thank you!
IPFire 2.x (Latest Update) on x86_64 Intel Bay Trail CPU, 4GiB RAM, RED + GREEN + BLUE + ORANGE
Re: ntopng for IPFire
Hi dnl,
your welcome.
There are also some upcoming changes causing IPFire itself. json-c will be dropped for this installation here since IPFire delivers it with Core 125. Also the paxctl commands are not needed anymore with >= Core 125 since it has also been dropped.
From my point, i will drop the 32bit version with the next version since my second building environment has been died and am currently only on 64bit building platform (if donations for a new Mainboard comes up, i would think about this may another time
).
Greetings,
UE
your welcome.
they do usually only causes ntopng itself to fail. ntopng uses libpcap to analyses the packages only but ntopng comes also with different versions --> https://www.ntop.org/products/traffic-analysis/ntop/ (Community, Professional, Enterprise whereby the last two are paid version) where it is also possible to enforce Layer-7 Traffic policies --> https://www.ntop.org/ndpi/how-to-enforc ... ng-ntopng/ which includes also inline traffic capabilities but also in that case i think it won´t causes problems in the IPFire system itself (separate installation) but i have there no experience since i only use the community version of ntopng.
There are also some upcoming changes causing IPFire itself. json-c will be dropped for this installation here since IPFire delivers it with Core 125. Also the paxctl commands are not needed anymore with >= Core 125 since it has also been dropped.
From my point, i will drop the 32bit version with the next version since my second building environment has been died and am currently only on 64bit building platform (if donations for a new Mainboard comes up, i would think about this may another time

Greetings,
UE
Re: ntopng for IPFire
Thanks ummeegge, your installer is very easy to use.
I've just installed it and will spend a bit of time reading the documentation to understand this application.
I've just installed it and will spend a bit of time reading the documentation to understand this application.
IPFire 2.x (Latest Update) on x86_64 Intel Bay Trail CPU, 4GiB RAM, RED + GREEN + BLUE + ORANGE
Re: ntopng for IPFire
Hello Ummeegge,
I've got a problem where ntop is only showing my BLUE (WiFi) network in dashboards and in the "Local Hosts" page.
All my GREEN (wired) network devices do appear in the "All Hosts" page though.
Your shell script has set the "--local-networks" option correctly for BOTH networks in /etc/ntopng.conf so I'm not sure why this is happening.
EDIT: ID10T error. It seems the "Interfaces" menu is set back to blue0 even though I'd selected green0 at one point.
I notice that it keeps thinking android phones are Apple IOS computers (not phones) and if you change them from a computer to a phone it doesn't save, but that's a very minor problem.
I've got a problem where ntop is only showing my BLUE (WiFi) network in dashboards and in the "Local Hosts" page.
All my GREEN (wired) network devices do appear in the "All Hosts" page though.
Your shell script has set the "--local-networks" option correctly for BOTH networks in /etc/ntopng.conf so I'm not sure why this is happening.
EDIT: ID10T error. It seems the "Interfaces" menu is set back to blue0 even though I'd selected green0 at one point.
I notice that it keeps thinking android phones are Apple IOS computers (not phones) and if you change them from a computer to a phone it doesn't save, but that's a very minor problem.
IPFire 2.x (Latest Update) on x86_64 Intel Bay Trail CPU, 4GiB RAM, RED + GREEN + BLUE + ORANGE
Re: ntopng for IPFire
Hi dnl,
Is this persistent or does it only appears sometimes ?
Best,
UE
the dashboard, flows and host section is separated by the selected "Interfaces", better overview. So you would need to change the interface and the dashboard, flows, host section will be updated appropriately.
No problem here with this.
Tried that too and i have also no problem to change this via the "Host Alias" section.
Is this persistent or does it only appears sometimes ?
Best,
UE
Re: ntopng for IPFire
Hi again,
I enabled "Network Discovery" in the preferences and have it running once a day. It seems that feature will override changes made to a host, which is not what I expected.
IPFire 2.x (Latest Update) on x86_64 Intel Bay Trail CPU, 4GiB RAM, RED + GREEN + BLUE + ORANGE
Re: ntopng for IPFire
Hi dnl,
i do have also "Network Discovery" every 15 minutes enabled and have checked for your incidence and the host entries are not be overwritten here but i found also a problem in the host pool section. If i want to set the "Device Type" in "Manage Pool Membership" the menu disappears if i try to click one entry. This happens only if "Member Address" or "Alias / Manufacturer" has already content, if they are empty the menu can be used without problems.
Can you describe your procedures step by step to better reproduce this bug so we can possibly ask on the ntopng community for a possible fix.
Greetings,
UE
i do have also "Network Discovery" every 15 minutes enabled and have checked for your incidence and the host entries are not be overwritten here but i found also a problem in the host pool section. If i want to set the "Device Type" in "Manage Pool Membership" the menu disappears if i try to click one entry. This happens only if "Member Address" or "Alias / Manufacturer" has already content, if they are empty the menu can be used without problems.
Can you describe your procedures step by step to better reproduce this bug so we can possibly ask on the ntopng community for a possible fix.
Greetings,
UE
Re: ntopng for IPFire
The problem still occurs for me, but I've not kept a list of everything I've changed, sorry!
When I have time I'll reset/drop the database and try again from scratch.
IPFire 2.x (Latest Update) on x86_64 Intel Bay Trail CPU, 4GiB RAM, RED + GREEN + BLUE + ORANGE
Re: ntopng for IPFire
I get this kind of problem when trying to install ntopng:
I have tryiet to delete all and reboot the machine, but no go. And I have tryet to install it with different options, but still no go.
Any suggests?
Machine is x86-64 and ipfire is Core 125.
I have tryiet to delete all and reboot the machine, but no go. And I have tryet to install it with different options, but still no go.
Any suggests?
Machine is x86-64 and ipfire is Core 125.
Re: ntopng for IPFire
Hi iccb,
did you use the actual installer from here --> viewtopic.php?f=50&t=19565#p111061 ? Or did you execute this commands
?
UE
did you use the actual installer from here --> viewtopic.php?f=50&t=19565#p111061 ? Or did you execute this commands
Code: Select all
cd /tmp &&
curl -O https://gitlab.com/ummeegge/ntopng-ipfire/raw/master/scripts/ntopng-installer.sh &&
chmod +x ntopng-installer.sh
./ntopng-installer.sh
UE
Re: ntopng for IPFire
I used those commands in terminal. I can try to download installer.ummeegge wrote: ↑December 19th, 2018, 10:14 amHi iccb,
did you use the actual installer from here --> viewtopic.php?f=50&t=19565#p111061 ? Or did you execute this commands
?Code: Select all
cd /tmp && curl -O https://gitlab.com/ummeegge/ntopng-ipfire/raw/master/scripts/ntopng-installer.sh && chmod +x ntopng-installer.sh ./ntopng-installer.sh
UE
Re: ntopng for IPFire
I copied the install script to my firewall and installed ntopng through the script, and it worked!
Thx ummeegge for your hard work for this addon and ipfire general!
Thx ummeegge for your hard work for this addon and ipfire general!
