Port Forward Configuration

Post Reply
Canapla
Posts: 2
Joined: May 9th, 2018, 4:50 pm

Port Forward Configuration

Post by Canapla » May 9th, 2018, 4:58 pm

I have many problem to set the port forwarding to reach a web server in my orange network
My situation is:

Green network 192.168.0.0
Orange network 192.168.5.0
And the red Netwok

I've set the rule to reach the FTP server on address 192.168.5.2 (IPfire is 192.168.5.1)

Source: standard network or RED (I've try both)
NAT: mark or unmark (I've try both)
Destination: I 've try to put the address 192.168.5.2 or Standard netword ORANGE (I've try both)
Protocol: TCP 21
ACCEPT
and Activate RULE

But No signal arrive to the server

I have try to make a rule to connect the same server form the green network and work perfect....
Where I have made the mistake?

Thanks

Canapla
Posts: 2
Joined: May 9th, 2018, 4:50 pm

Re: Port Forward Configuration

Post by Canapla » May 18th, 2018, 3:58 pm

Still nobody can answer me? :(

fredym
Posts: 393
Joined: November 14th, 2016, 2:45 pm

Re: Port Forward Configuration

Post by fredym » May 18th, 2018, 5:03 pm

Canapla wrote:
May 18th, 2018, 3:58 pm
Still nobody can answer me? :(
Your search engine is died ??
It is a very FAQ !

Fred

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests