IPFire on SBC Libre Computer Tritium H5 2GB ram

Questions & Discussion about the right Hardware to run IPFire on
Post Reply
Antaris
Posts: 16
Joined: November 1st, 2013, 10:07 pm

IPFire on SBC Libre Computer Tritium H5 2GB ram

Post by Antaris » March 24th, 2019, 6:45 pm

Hi,

I saw experiments with arm boars evolving here and i have a board to experiment:

https://libre.computer/products/boards/all-h3-cc/

They have builds for Linux up to 4.19:

https://libre.computer/2019/02/07/linux ... r-tritium/

Where to find an image to flash and what USB LAN adapter to put in it? Is Asix are good enoug?

User avatar
MichaelTremer
Core Developer
Core Developer
Posts: 5770
Joined: August 11th, 2005, 9:02 am

Re: IPFire on SBC Libre Computer Tritium H5 2GB ram

Post by MichaelTremer » March 25th, 2019, 12:31 pm

This is just another clone of the RPi. I doubt that it runs with IPFire.
Support the project with our Donation Challenge!

Get Commercial Support for IPFire and more from Lightning Wire Labs!

Image

User avatar
Arne.F
Core Developer
Core Developer
Posts: 8235
Joined: May 7th, 2006, 8:57 am
Location: BS <-> NDH
Contact:

Re: IPFire on SBC Libre Computer Tritium H5 2GB ram

Post by Arne.F » March 26th, 2019, 9:53 am

The H3 version may work but you need a correct dtb file which is not included with IPFire.

The H5 is not supported because some patches are missing and the H5 need a different/signed bootloader and we have only experimental 64bit builds.
Arne

Support the project on the donation!

Image

Image

Image
PS: I will not answer support questions via email and ignore IPFire related messages on my non IPFire.org mail addresses.

Antaris
Posts: 16
Joined: November 1st, 2013, 10:07 pm

Re: IPFire on SBC Libre Computer Tritium H5 2GB ram

Post by Antaris » March 26th, 2019, 1:37 pm

H5 is 64 bit AFAIK.
Can i find the 'dtb' file in their Ubuntu image?
PS i found "board.dtb" in their Lunix image, bot don't knoh how to put it in IPFire image.
Also in the IPFire image i found "sun8i-h3-libretech-tritium.dtb" ??!
May be i have to name it "sun8i-h5-libretech-tritium.dtb" and add it to \dtb-4.14.103-ipfire-multi\ folder?

Otherwise i tryed "ipfire-2.21.2gb-ext4.armv5tel-full-core128.img" but with it the Tritium won't start...

User avatar
Arne.F
Core Developer
Core Developer
Posts: 8235
Joined: May 7th, 2006, 8:57 am
Location: BS <-> NDH
Contact:

Re: IPFire on SBC Libre Computer Tritium H5 2GB ram

Post by Arne.F » March 26th, 2019, 2:49 pm

I have not got any H5 to boot with a self compiled bootloader yet.

I also have never seen a 32bit distri on such board yet.
Arne

Support the project on the donation!

Image

Image

Image
PS: I will not answer support questions via email and ignore IPFire related messages on my non IPFire.org mail addresses.

Post Reply