Raspberry Pi 4

Questions & Discussion about the right Hardware to run IPFire on
ptartari
Posts: 4
Joined: August 15th, 2019, 11:09 am

Re: Raspberry Pi 4

Post by ptartari » October 19th, 2019, 7:08 am

Hi Guys, any news about this project?
Many thanks
Have a nice day
Paolo

rodneyp
Posts: 149
Joined: October 4th, 2010, 2:17 am
Location: Australia

Re: Raspberry Pi 4

Post by rodneyp » October 20th, 2019, 8:45 pm

After a fashion

A friend who purchased one has had to spend the same amount again on finned heatsinks that cover the whole of the base plus all area that is free of sockets on the top as well as two micro-fans on top. It's now stopped overheating - during mid-season weather. Situation in summer remains to be seen.

As a result, the plastic case is no longer usable. Aluminium cases are available, but don't provide direct heat-sinking and might not be an effective solution.

Not a low cost solution and could still require careful placement of the device to get adequate airflow.

JonM
Posts: 142
Joined: August 4th, 2017, 5:49 pm
Location: US

Re: Raspberry Pi 4

Post by JonM » October 20th, 2019, 10:36 pm

There is a firmware update for the Raspberry Pi 4B that lowers the temp a few degrees. I've found a few links but I have not located the Official Raspberry Pi fix. There is a concern about USB 3 speed slow-downs after applying the new firmware.

My Raspi 4B is not overheating or throttling that I've noticed. But I am not stressing it or using for anything heavy duty. I'll run some tests sometime soon.

Non-official link:
https://www.cnx-software.com/2019/06/29 ... mperature/
https://www.tomshardware.com/news/raspb ... 39791.html

EDIT:
I think this is the official version:
https://www.raspberrypi.org/forums/view ... 5#p1490467
Production:
Image

Testing Raspi 3B+:
Image

JonM
Posts: 142
Joined: August 4th, 2017, 5:49 pm
Location: US

Re: Raspberry Pi 4

Post by JonM » November 1st, 2019, 2:00 pm

Came across this as I was looking for something else:

RPI4: NOW OVERCLOCKED, NET-BOOTED, AND POWER-SIPPING
https://hackaday.com/2019/10/30/rpi4-no ... r-sipping/

Full disclosure: I have not tried this yet.
Production:
Image

Testing Raspi 3B+:
Image

bortek
Posts: 8
Joined: December 1st, 2018, 9:41 am

Re: Raspberry Pi 4

Post by bortek » November 3rd, 2019, 5:43 am

My pi4 does not overheat and works perfectly well. Waiting for ipfire release that will work on it.

User avatar
Arne.F
Core Developer
Core Developer
Posts: 8513
Joined: May 7th, 2006, 8:57 am
Location: BS <-> NDH
Contact:

Re: Raspberry Pi 4

Post by Arne.F » November 5th, 2019, 7:33 am

Until the mainline Kernel support it and we are on this version it will not work. So this can take long time...
Arne

Support the project on the donation!

Image

Image

Image
PS: I will not answer support questions via email and ignore IPFire related messages on my non IPFire.org mail addresses.

Post Reply