Page 1 of 1

IPFire on SBC Libre Computer Tritium H5 2GB ram

Posted: March 24th, 2019, 6:45 pm
by Antaris
Hi,

I saw experiments with arm boars evolving here and i have a board to experiment:

https://libre.computer/products/boards/all-h3-cc/

They have builds for Linux up to 4.19:

https://libre.computer/2019/02/07/linux ... r-tritium/

Where to find an image to flash and what USB LAN adapter to put in it? Is Asix are good enoug?

Re: IPFire on SBC Libre Computer Tritium H5 2GB ram

Posted: March 25th, 2019, 12:31 pm
by MichaelTremer
This is just another clone of the RPi. I doubt that it runs with IPFire.

Re: IPFire on SBC Libre Computer Tritium H5 2GB ram

Posted: March 26th, 2019, 9:53 am
by Arne.F
The H3 version may work but you need a correct dtb file which is not included with IPFire.

The H5 is not supported because some patches are missing and the H5 need a different/signed bootloader and we have only experimental 64bit builds.

Re: IPFire on SBC Libre Computer Tritium H5 2GB ram

Posted: March 26th, 2019, 1:37 pm
by Antaris
H5 is 64 bit AFAIK.
Can i find the 'dtb' file in their Ubuntu image?
PS i found "board.dtb" in their Lunix image, bot don't knoh how to put it in IPFire image.
Also in the IPFire image i found "sun8i-h3-libretech-tritium.dtb" ??!
May be i have to name it "sun8i-h5-libretech-tritium.dtb" and add it to \dtb-4.14.103-ipfire-multi\ folder?

Otherwise i tryed "ipfire-2.21.2gb-ext4.armv5tel-full-core128.img" but with it the Tritium won't start...

Re: IPFire on SBC Libre Computer Tritium H5 2GB ram

Posted: March 26th, 2019, 2:49 pm
by Arne.F
I have not got any H5 to boot with a self compiled bootloader yet.

I also have never seen a 32bit distri on such board yet.